Arctic Fan 140mm P14 Pro Reverse A-RGB - ACFAN00323A

Arctic P14 Pro Reverse A-RGB is a 140 mm case and radiator fan aimed at people who want serious airflow and pressure without sacrificing the aesthetics of their build. The “Reverse” design allows you to see the clean A-RGB side without the ugly frames and ribs showing, which is especially convenient for front intake or on radiators at the front. With speeds from 400–2650 RPM, airflow up to 98 CFM, and static pressure up to 5.1 mmH2O, the fan is designed to handle dense filters and radiators. The dynamic fluid bearing and the special “Minimum Gap Dimensions for Maximum Efficiency” design are here to help you get the most out of every rotation.

What you get

With a size of 140 x 140 x 27 mm, this fan covers the standard 140 mm form factor but with slightly greater thickness for more serious pressure and stability at high speeds. The range of 400 to 2650 RPM allows you to run it super quietly at idle and ramp up the speeds significantly under load when the CPU and GPU heat up. The airflow of 98 CFM and static pressure of 5.1 mmH2O make it suitable for installation through dense mesh panels or on radiators, where weak fans simply suffocate. The 4-pin PWM connector gives you fine control through the motherboard or controller, and the separate 3-pin 5V ADD-RGB connects to the A-RGB header to synchronize the lighting with the other components. The “SOTA Microcontroller” hints at more precise control and efficiency, which is a plus for both noise and temperature in the case.

• Fan with a standard size of 140 mm, suitable for both case and radiator mounting.
• Speed range of 400–2650 RPM, allowing for a quiet profile during light work and aggressive cooling under load.
• Strong airflow up to 98 CFM and static pressure 5.1 mmH2O for effective cooling through filters and dense radiators.
• Dynamic fluid bearing, designed for long life and lower noise compared to basic sleeve bearings.
• Reverse rotation direction, so the A-RGB side faces you even when the fan blows inward.
• Addressable RGB lighting with 3-pin 5V ADD-RGB connector for individual control of each LED and synchronization with other components.
• 4-pin PWM power at 12 V for precise speed control based on temperature.
• Special design “Minimum Gap Dimensions for Maximum Efficiency” and SOTA Microcontroller for better aerodynamics and control.
• Long warranty of 72 months, which is a strong signal of trust in reliability.

Who it is suitable for

This fan is a logical choice if you are building a gaming or high-performance build with a focus on cooling – especially for 240/280/420 mm radiators or front intake with dense filters. It is also suitable if you want a clean RGB look at the front without the back ribs showing, thanks to the reverse design. If you are looking for a completely basic, low-speed, and cheap fan without lighting, this might be a bit overkill.

The combination of high airflow, strong static pressure, reverse A-RGB design, and a long 6-year warranty makes the Arctic P14 Pro Reverse A-RGB a very sensible core for a seriously cooled and visually organized case.