Arctic P14 PWM PST A-RGB 0dB Fan (Black) - ACFAN00239A

Arctic P14 PWM PST A-RGB 0dB (Black) is a 140 mm case fan aimed at serious gaming and enthusiast configurations, where cooling and noise carry equal weight. You get a large 140 x 140 mm fan with maximum speeds of up to 1900 RPM, strong airflow, and a relatively low noise level of 22.5 dBA. The addressable ARGB lighting gives you freedom for synchronization with the motherboard or controller and customization of the look. The black color and standard connectors make it easy to integrate into almost any build.

What you get

With the Arctic P14 PWM PST A-RGB 0dB fan, you get a combination of flow and pressure – up to 68.90 CFM airflow and 2.00 mmH2O maximum pressure, which is useful for both intake/exhaust fans in the case, as well as for denser filters and grilles. The low noise level of 22.5 dBA at 12 V and a consumption of only 2.04 W (0.17 A) means you can keep the configuration quieter even under higher load. The dynamic fluid bearing is designed for longer life and smoother operation, which is important if your machine runs all day. Through 4 Pin PWM, you control the RPM precisely according to temperature, while the 3 PIN 5V ARGB connector allows you to integrate the lighting into the overall RGB scheme of the system. Thus, you get a fan that is not just a “lamp,” but actually helps with airflow in the case.

• Large standard size 140 mm (actual dimensions 140 x 140 x 27 mm) for greater airflow at lower speeds compared to 120 mm fans.
• Maximum speeds of up to 1900 RPM, providing serious headroom for cooling under heavy CPU and GPU loads.
• Airflow of up to 68.90 CFM, which helps effectively expel warm air from the case or bring in cold air.
• Maximum static pressure of 2.00 mmH2O, suitable for operation behind filters and radiators with denser structures.
• Low noise level of only 22.5 dBA, so your system remains quiet even at higher speeds.
• Dynamic fluid bearing for longer life and smoother rotation compared to basic sleeve/ball solutions.
• 4 Pin PWM for precise speed control and 3 PIN 5V ARGB for full Addressable RGB lighting, synchronized with the motherboard or controller.
• Low consumption of only 2.04 W at 12 V and 0.17 A, which minimally loads the fan headers.
• Long warranty of a full 72 months, providing peace of mind for long-term reliability.

Who it is suitable for

This fan is suitable if you are building a gaming or workstation system and want a balanced solution between airflow, noise, and appearance with ARGB. It fits well in mid-range and high-end cases with 140 mm positions – as an intake or exhaust fan, and if needed, for radiators that rely on higher static pressure. If you are looking for a completely budget, non-ARGB fan, you are paying for the lighting here, so there are cheaper alternatives.

The most sensible aspect of this model is the combination of the 140 mm form factor, solid airflow and pressure parameters, controllable PWM, and Addressable RGB, secured with a long 72-month warranty.