Fan ARCTIC P8 PWM PST

ARCTIC P8 PWM PST is an 80 mm case fan aimed at compact systems and people who want good control over cooling without unnecessary effects. It operates in a wide range of 200 - 3000 RPM, giving you the freedom – from nearly silent operation to serious airflow when needed. With an airflow of 23.4 CFM / 39.76 m3/h and static pressure of 1.90 mmH2O, the fan is a good choice for dense cases or areas with more limited airflow paths. The black design and lack of RGB make it simple and easy to fit into almost any build.

What you get

You get an 80 x 80 x 25 mm fan with a dynamic fluid bearing, designed for long life and stable operation at 12 V. The connector is 4 PIN, so you can rely on PWM control – the motherboard or controller can lower the RPM to 200 RPM in idle and raise it to 3000 RPM under load. With a consumption of only 0.09 A, the fan hardly burdens the power line, which is important if you have many fans and peripherals on a smaller PSU budget. With a cable length of 40 cm, you have enough freedom to connect it conveniently in most microATX and mini-ITX cases. Weighing 81 g and with 5 blades, it strikes a balance between stability and quick response to PWM control.

• Standard size fan 80 mm, primarily suitable for compact cases and older chassis with 80 mm positions.
• Operating range of 200 - 3000 RPM, allowing fine adjustment between silence and maximum cooling depending on the load.
• Airflow of 23.4 CFM / 39.76 m3/h and static pressure of 1.90 mmH2O for effective exhaust or intake of air through denser grilles and openings.
• Dynamic fluid bearing for longer life and more stable operation at high speeds compared to standard sleeve bearings.
• 4 PIN PWM connector for automatic speed control via the motherboard or external controller.
• Low consumption of 0.09 A at 12 V, allowing use in systems with many fans without unnecessary load.
• Cable length of 40 cm and weight of 81 g, facilitating installation and cable management in smaller configurations.
• No RGB lighting and entirely black design for a clean, unobtrusive look in the system.
• Long warranty of a full 120 months, which is a serious plus if you are looking for a "plug and forget" solution.

Who it is suitable for

This fan is suitable if you are building or refreshing a compact system with 80 mm positions – office PC, small home server, or older gaming build. It is ideal if you value PWM control and reliability over RGB aesthetics. It is not suitable if your case is entirely equipped with 120/140 mm positions or if you are looking for a completely visually-oriented build with lighting.

The most sensible aspect here is the combination of 80 mm format, wide PWM range, and long warranty – a fan that simply gets the job done and you can rely on for years to come.