Fan be quiet! Pure Wings 3 120mm PWM high-speed White - BL111

be quiet! Pure Wings 3 120mm PWM high-speed White (BL111) is a 120 mm fan aimed at serious cooling – both for cases and radiators. It combines a high maximum speed of 2100 RPM with a radiator-optimized fan frame, allowing it to effectively push air even through dense fins. The white color makes it a logical choice for light builds where you seek a clean look without RGB. You get a fan that is more performance-oriented, with control via 4-pin PWM, so you can adjust it according to the noise and temperatures you are targeting.

What you get

With speeds ranging from 300–2100 RPM, you can run it almost silently at low speeds for idle and light load, while under full load you can increase airflow and pressure when you really need to expel heat from the case or radiator. The declared airflow of 101.2 m³/h, along with a maximum static pressure of 2.41 mmH₂O, makes it suitable for both dense radiators and front intake behind filters. The Rifle Bearing and MTBF of 80,000 hours mean long life at 12 V power supply and up to 4.56 W consumption, without worrying about rapid wear. The noise level of up to 30.9 dBA is expected for a high-speed fan and is kept under control thanks to PWM management.

• Size 120 x 120 x 25 mm – standard format that fits most cases and radiators for easy upgrade or addition of fans.
• Speed 300–2100 RPM – wide range for fine-tuning between silence at low speeds and aggressive cooling at high loads.
• Airflow 101.2 m³/h – sufficient flow for effective cooling of components and expelling hot air from the case.
• Max. static pressure 2.41 mmH₂O – suitable for use on radiators and behind dust filters, where resistance is higher.
• Noise level 30.9 dBA – normal for a high-speed fan, with PWM control allowing you to reduce noise during everyday use.
• Rifle Bearing and MTBF 80,000 hours – ensure long operational life and more reliable operation in 24/7 systems.
• 4-pin PWM connector, 12 V, 0.38 A / 4.56 W – standard compatibility with motherboards and fan controllers for automatic or manual control.
• Optimized radiator frame – specially shaped fan frame for better efficiency on water radiators and dense surfaces.
• White color without RGB – clean, minimalist appearance for white or minimalist builds if you don’t want lighting.

Who is it suitable for

This fan is a good choice if you are building a gaming or workstation setup and looking for a 120 mm solution for a radiator or case that can cool seriously when needed. It is also suitable for those who want a white but not “glowing” configuration and care about controllable noise through PWM. If you are aiming for an absolutely silent system at all costs, the constant operation at high speeds may not be to your liking – but you can simply limit the RPM curve.

The combination of high RPM range, good static pressure, and optimized radiator frame makes the Pure Wings 3 120mm PWM high-speed White BL111 a practical choice if you prioritize effective cooling and a clean, white look over RGB effects.