Fan Chieftec ZF 120 mm PWM Fan

Chieftec ZF 120 mm PWM Fan is a 120 mm case fan, aimed at stable and controllable cooling without unnecessary effects. With a hydraulic bearing, 4-pin PWM control, and a speed up to 1600 RPM, it is a good choice for systems where you seek a balance between airflow and noise. It operates on standard 12 V and remains relatively quiet at a maximum of 25.5 dBA. The clean, black design without RGB makes it suitable for more understated or stealth cases.

What you get: a fan with dimensions of 120 x 120 x 25 mm, which easily fits into almost any modern case. The airflow of 33.12 CFM is sufficient for adequate airflow in a standard gaming or office build, especially if you combine several such fans at the front and rear for a push-pull configuration. Thanks to the 4 PIN PWM connector, you can control the RPM via the motherboard based on CPU/GPU temperature, so the fan stays quiet in idle and spins up under load. The hydraulic bearing helps for smoother operation and reduced noise in the long run, and the consumption of 0.28 A at 12 V is within the standard capabilities of most motherboards.

• Standard size 120 x 120 x 25 mm, making it compatible with most ATX and mATX cases.
• Maximum 1600 RPM, providing a good balance between cooling and acceptable noise levels.
• Airflow of 33.12 CFM, suitable for improving overall airflow in the case.
• Noise level up to 25.5 dBA, which is reasonably quiet for a 120 mm fan under load.
• Hydraulic bearing for smoother operation and longer lifespan compared to basic sleeve solutions.
• 4 PIN PWM connector, allowing automatic RPM control via BIOS or software.
• Standard power supply 12 V / 0.28 A, compatible with most motherboards and controllers.
• Clean black design without RGB lighting, suitable for minimalist or professional builds.
• 24-month warranty, providing peace of mind for long-term use.

This fan is suitable for budget and mid-range configurations where you want sensible case cooling without excessive lights and without dealing with non-standard formats. It is also a good choice if you want to add more airflow to an existing system with PWM control. It is not the most suitable option if you are chasing extreme airflow for a very hot high-end build with limited ventilation or if you are looking for mandatory RGB aesthetics.

The combination of PWM control, hydraulic bearing, and decent airflow in a standard 120 mm format makes the Chieftec ZF 120 mm PWM Fan a practical and sensible choice for everyday and gaming PC cases. The clean black design and the two-year warranty complete the package without unnecessary compromises.