Fan Chieftec ZF 120 mm PWM Fan RGB

Chieftec ZF 120 mm PWM Fan RGB is a case fan with addressable RGB lighting, aimed at budget and mid-range configurations where you want a balance between cooling, silence, and aesthetics. Although its name suggests it is 120 mm, the actual dimensions are 140 x 140 x 25 mm, so plan it for spots for 140 mm fans in the case. With up to 1600 RPM, it offers stable airflow for gaming and workstation systems without generating significant noise. The black housing and addressable RGB lighting allow you to easily connect it to the rest of the RGB in the case and maintain a clean appearance.

What you get

With a maximum airflow of 48.2 CFM, this fan is fully adequate for use as an intake in the front or as an exhaust at the back/top for medium to higher load systems. RPMs up to 1600 RPM and a 4-pin PWM connector give you precise control through the motherboard – you can keep it almost silent at idle and ramp it up only under load. A noise level of up to 25.8 dBA is good for a 140 mm fan and means that under normal spinning profiles it won't dominate over other components. The hydraulic bearing ensures longer life and less vibration compared to basic sleeve solutions. Addressable RGB with a 3 pin ADD-RGB 5V connector gives you full control of effects through compatible motherboard software, allowing you to synchronize all components.

• Case fan with actual dimensions 140 x 140 x 25 mm, suitable for standard 140 mm positions in the front, back, or top.
• Maximum RPMs up to 1600 RPM, allowing a good balance between cooling and noise according to the profile you set.
• Airflow 48.2 CFM, sufficient for effectively exhausting warm air from gaming and workstation configurations.
• Noise level up to 25.8 dBA, keeping the system relatively quiet even at higher RPMs.
• Hydraulic bearing for better durability and lower vibrations compared to basic fans.
• 4 PIN PWM connector for automatic RPM control and 3 pin ADD-RGB 5V for lighting control through the motherboard.
• Addressable RGB lighting and black housing for a clean and easy-to-combine appearance.
• 12 V power supply and a warranty of 24 months for peace of mind during daily use.

Who it is suitable for

This fan is suitable if you are building a gaming or all-round PC and want 140 mm cooling with PWM control and addressable RGB, without paying extra for “fancy” models. It is good for front intake and rear/top exhaust in mid-tower cases with 140 mm positions. If you are aiming for a completely silent system under full load or extreme overclocking, you might want to look at more specialized models, but for mainstream scenarios, this one is more than sufficient.

The combination of 140 mm format, PWM control, addressable RGB, and relatively low noise makes it a very reasonable choice for a balanced, well-cooled, and visually organized build.