Fan Cougar Apolar 120 ARBG White - CG3MAPR12A10002

Cougar Apolar 120 ARBG White is a 120 mm case fan that focuses on a balance between airflow, pressure, and looks with addressable RGB. The white color and ARGB lighting make it a logical choice if you are aiming for a clean, refined build with good illumination. At up to 2200 RPM, the fan can push a serious volume of air and keep components cooler. The hybrid bearing is aimed at better lifespan and smoother operation compared to the most basic solutions.

What you get
With a size of 120 x 120 x 28 mm, this fan is a standard solution for most cases, but with a slightly greater thickness for better pressure. The airflow of up to 75.38 CFM ± 10% in combination with a maximum static pressure of 2.59 mm H2O ±10% means it performs well on both mesh panels and denser filters or radiators. The noise level of up to 37.1 dB(A) is expected at these speeds – it is not ultra-quiet, but it is normal for cooling with an emphasis on performance. Through the 4 PIN connector, you control the speeds via the motherboard, while the 3 pin ADD-RGB 5V gives you full control over the RGB effects. The consumption of up to 2.4 W and current of 0.2 A are completely comfortable for any modern motherboard.

• Standard size 120 mm, suitable for most gaming and office cases, with easy mounting from the front, top, or rear.
• Maximum speeds of up to 2200 RPM, providing serious airflow for lower temperatures under load.
• Airflow of up to 75.38 CFM ± 10%, which is a good choice if you want strong ventilation and effective exhaust of hot air from the case.
• Static pressure of up to 2.59 mm H2O ±10%, allowing the fan to work well through dust filters or denser surfaces.
• Noise level of up to 37.1 dB(A), typical for a high-speed fan that can easily be tamed in idle with a proper fan curve.
• Hybrid bearing Hybrid Bearing, aimed at a better balance between durability and smooth operation compared to very budget bearings.
• Addressable RGB lighting with a 3 pin ADD-RGB 5V connector, for synchronization with other ARGB components and fine-tuning of effects.
• White color and a weight of around 196 g ± 5g, which contributes to stability and a finished look in light or themed builds.
• Low consumption of up to 2.4 W at 5 V and a current of 0.2 A, gentle on the power supply and motherboard.

Who it is suitable for
Apolar 120 ARBG White is suitable if you are building a white or RGB-oriented build and want a fan that provides real airflow, not just lights. It is a good choice for front or top intake/exhaust, as well as for configurations where components generate more heat. If you are aiming for a completely silent computer at all costs, the maximum 2200 RPM might be too much for you, and you will need to rely on an aggressive fan curve.

The combination of high airflow, decent pressure, addressable RGB, and white design makes this fan a flexible option for modern gaming builds. You get well-balanced cooling and looks, without unnecessary compromises in the main parameters.