Fan DeepCool FD14 WH ARGB Fan 140mm

DeepCool FD14 WH ARGB is a 140 mm case fan that combines a white design, ARGB lighting, and stable airflow characteristics for modern builds. It operates in the range of 400–1650 RPM, providing good flexibility between silence and cooling. With an airflow of up to 82.53 CFM and static pressure of 1.96 mmAq, this fan performs well on mesh panels as well as behind filters. Add addressable RGB with six bright LEDs and you get a fan that looks and blows seriously.

What you get

The core here is the hydraulic bearing, which ensures a longer lifespan and lower noise at a maximum level of just 25.2 dBA – suitable for quiet gaming and work configurations. The size 140 x 140 x 25 mm gives you more air at lower speeds compared to 120 mm fans, which helps for calmer behavior under load. With a consumption of around 2.04 W at 12 V and 0.17 A, the load on the power supply and motherboard is minimal, even if you connect several units in series. Thanks to the combined 4 PIN connector for the fan and 3 PIN 5V ARGB for the lighting, you can easily synchronize RPM and RGB with the motherboard or controller. The convenient 8-pin cable, which can be “chained” between FD fans, simplifies cable management and reduces the number of visible cables in the case.

• Size 140 mm for higher airflow compared to 120 mm solutions at similar RPMs.
• RPM 400–1650, allowing for quiet mode at idle and aggressive cooling under load.
• Airflow 82.53 CFM and static pressure 1.96 mmAq are a good combination for front intake through filters or radiator-friendly configurations.
• Noise level 25.2 dBA, suitable for builds where silence is important, without sacrificing cooling performance completely.
• Hydraulic bearing for longer life and smoother operation compared to cheap sleeve bearings.
• Addressable RGB with six LEDs around the hub for uniform, synchronizable lighting with other ARGB components.
• Full-coverage rubber pads in every corner to reduce vibrations and additional comfort in low-noise builds.
• 8-pin chain cable for easy connection of multiple FD fans and a cleaner interior without cable chaos.
• White color that perfectly matches entirely white or light-themed cases.

Who it is suitable for

FD14 WH ARGB is a good choice if you are building a white gaming or workstation build and want a balance between stable cooling and low noise. It is suitable for front and top intake/exhaust, as well as for configurations where you care about coordinated ARGB lighting and clean cable management. If you are looking for completely RGB-free or super minimalist aesthetics, there are simpler options, but here the focus is also on the visual effect.

The combination of 140 mm format, hydraulic bearing, serious airflow, and well-implemented ARGB in a white casing makes DeepCool FD14 WH ARGB a very sensible choice for modern, clean, and cool builds.