Fan ENDORFY Fluctus 120 PWM Black - EY4A001

ENDORFY Fluctus 120 PWM Black is a 120 mm case and radiator fan, aimed at stable daily cooling without excessive effects and RGB. The black minimalist design makes it easy to fit into any build, while PWM control gives you control over the RPM according to the load. At up to 1800 RPM and an airflow of 56.3 CFM, you get serious air movement for a 120 mm size. Add to this the long life of 100,000 hours MTBF, and you have a fan that simply works and doesn't bother you.

What you get

This Fluctus 120 PWM is suitable for both cases and radiators, which gives you flexibility – you can use it for intake, exhaust, or on top of a water block. At 12 V and 0.3 A, the consumption is standard for this class, so motherboards and fan controllers will have no problem driving it. The dynamic fluid bearing is oriented towards a long life and smoother operation compared to cheap sleeve bearings, which is important with an MTBF of 100,000 hours. Through the 4-pin PWM connector, you can set fan curves according to the temperature of the CPU, GPU, or case, so that the machine is quiet in idle and more aggressive in load. The lack of RGB also simplifies cable management – one connector, without additional cables for lighting.

• Size 120 x 120 x 25 mm – standard form factor, which fits most cases and 120 mm radiators.
• RPM up to 1800 RPM – allows serious airflow when you need more aggressive cooling.
• Airflow 56.3 CFM – sufficient for effective ventilation of a case or radiator with a proper air tunnel.
• Dynamic fluid bearing – oriented towards a longer life and smoother operation during prolonged use.
• 4-pin PWM connector – gives you the possibility for automatic RPM control via the motherboard or fan controller.
• MTBF 100,000 hours – designed for long-term use without frequent replacement.
• Color: black, no RGB – clean, unobtrusive look, suitable for stealth or minimalist configurations.
• Warranty 72 months – long coverage from the manufacturer for peace of mind during long-term operation.

Who it is suitable for

It is suitable if you are building a clean, functional build without RGB and you need a reliable 120 mm fan for a case or AIO radiator. It is a good choice for gaming and work systems, where cooling and long life are more important than lights. If you are looking for synchronized RGB lighting and a “showcase” with effects, this model is simply not aimed at that.

The combination of 56.3 CFM at 1800 RPM, fluid bearing, and 100,000 hours MTBF makes the ENDORFY Fluctus 120 PWM Black a practical fan that you can comfortably install and forget about for a long time.