ENDORFY Stratus 120 PWM Fan - Black

ENDORFY Stratus 120 PWM is a 120 mm case fan aimed at people who want balanced cooling without unnecessary effects. You get a classic black fan without RGB, with PWM control and a wide range of speeds between 200 and 1400 RPM. With an airflow of 41.8 CFM and FDB bearing type, the idea is to combine good cooling with lower noise and long life. This is a simple, functional solution for airflow in your case, without paying for lights.

What you get

With dimensions 120 x 120 x 25 mm this fan is standardized for most modern cases and mounting positions – front intake, rear or top exhaust. The range from 200 to 1400 RPM with 4 PIN PWM connector gives you control via the motherboard – you can keep it at low speeds for quiet idle and raise the speeds under load when GPU and CPU heat up. The airflow of 41.8 CFM is fully sufficient for good overall circulation in a mid-tower system with several components that dissipate heat. The FDB bearing is a plus for durability and smoother operation at low speeds, which is important if you plan to run the fan for hours on end every day. At 12 V power supply and standard 4 PIN connector integration in your existing build is elementary – you connect to the motherboard and control via BIOS or software.

• The fan has dimensions 120 x 120 x 25 mm, which makes it compatible with almost all standard mounting positions in PC cases.
• Operating range from 200 - 1400 RPM allows you to balance between silence and more aggressive cooling according to the load.
• Airflow of 41.8 CFM ensures stable airflow for cooling components in a typical gaming or work computer.
• FDB (fluid dynamic bearing) type bearing gives smoother operation and longer life compared to cheap sleeve bearings, especially during prolonged use.
• Standard 4 PIN connector with PWM control gives you the possibility for automatic speed control from the motherboard.
• Works at 12 V, which is the standard for PC fans and ensures wide compatibility.
• Clean black design without RGB lighting is suitable if you are looking for a simple, unobtrusive look or stealth build.
• Long warranty of 60 months gives peace of mind that the fan is designed for serious durability.

Who is it suitable for

This fan is a good choice if you are building a budget or mid-range build and want reliable airflow without emphasis on visuals and RGB. Suitable for cases with missing or weak factory fans, as well as for people who value silence and PWM control. If you are chasing maximum airflow at high speeds or aggressive RGB setup, you will probably not find what you are looking for here.

The combination of PWM control, FDB bearing, stable airflow and 60 months warranty makes ENDORFY Stratus 120 PWM a very reasonable choice for reliable, daily cooling of your case. Simple, functional and aimed at people who want to get the job done without unnecessary effects.