Fan ENDORFY Stratus 140 PWM - Black

ENDORFY Stratus 140 PWM is a 140 mm case fan aimed at quiet and balanced configurations. The black design without RGB makes it a good choice if you're going for a clean look and fewer unnecessary cables. PWM control gives you control over speeds between 200 and 1200 RPM, allowing you to easily balance between noise and cooling. Combined with an FDB bearing, you get smoother operation and a long lifespan – supported by a 60-month warranty.

What you get
With dimensions of 140 x 140 x 25 mm, this fan covers standard mounting positions for 140 mm in most cases. At up to 1200 RPM and an airflow of 38 CFM, it is suitable for front intake or for exhausting warm air from the back or top of the case. The 4-pin PWM connector allows the motherboard to automatically control the speeds according to temperature, so at idle it remains almost inaudible, while under load it increases the necessary RPM. The FDB bearing (Fluid Dynamic Bearing) reduces vibrations and wear, which is especially important if your machine runs many hours a day. The lack of RGB also means fewer potential issues with additional controllers and software.

• The fan is of standard size 140 mm, which provides a larger blade than 120 mm models and better airflow at lower speeds.
• The operating range of 200 – 1200 RPM gives you flexibility – from almost silent operation to stable airflow under load.
• With an airflow of 38 CFM, the fan is suitable for general cooling of the case in gaming and work systems.
• FDB bearing (Fluid Dynamic Bearing) ensures quieter operation and longer life compared to more basic bearings, which is important for 24/7 machines.
• 4-pin PWM connector allows intelligent speed control through the motherboard or controller, instead of the fan running constantly at maximum.
• Operates at standard 12 V, making it compatible with almost all modern motherboards and fan hubs.
• Entirely black design without RGB is suitable for minimalist builds or systems where you don't want a light show.
• The long 60-month warranty is a good indicator that you can plan it for several upgrade cycles ahead.

Who it's suitable for
It is suitable if you are building a quiet, clean-looking build – gaming or workstation – and need a reliable 140 mm fan for intake or exhaust. It is also a good choice for those who want PWM control and a quality bearing but do not care about RGB effects. If you are looking for maximum airflow at any cost or an aggressive RGB look, this is not the right model for you.

The combination of 140 mm format, PWM control, FDB bearing, and 60-month warranty makes ENDORFY Stratus 140 PWM a sensible choice for quiet and reliable airflow in your case, without unnecessary extras.