Evercool 120x120x25 Fan (2200 RPM) - 12025H12BA

Evercool 12025H12BA is a 120 mm case fan aimed at people looking for more serious airflow rather than maximum silence. With speeds up to 2200 RPM and a flow rate of up to 84.76 CFM, this fan is suitable for cases with warmer systems or limited airflow. It uses a 2 Ball Bearing bearing, which is a plus for longevity at higher speeds and vertical mounting. The standard dimensions of 120 x 120 x 25 mm and 3 PIN connector make it compatible with many older and newer motherboards.

What you get is a fan that can push a serious amount of air through dense mesh panels and front filters, thanks to a flow rate of up to 144.01 m3/h. The noise level is below 39 dBA, which is an expected compromise for 2200 RPM – not for super-quiet builds, but for cooling with priority. With a consumption of only 3.96 W at 12 V and a current of 0.33 A, it does not put additional load on the PSU or fan headers on the motherboard. The 2 Ball Bearing design and declared MTBF 50000 hours mean that the fan is designed for long-term operation, including at higher temperatures and 24/7 modes. The black color easily fits into any build without imposing RGB or design.

• Standard size 120 x 120 x 25 mm, making it easy to install in most cases and radiators supporting 120 mm fans.
• Maximum speeds up to 2200 RPM, providing aggressive airflow for better cooling in loaded systems.
• Airflow up to 84.76 CFM / 144.01 m3/h, suitable for cases with limited air exchange or dense dust filters.
• Noise level below 39 dBA, which is a reasonable balance for a fan with such high speeds and flow rate.
• 2 Ball Bearing design, providing longer life and more reliable operation in vertical mounting and higher temperatures.
• Consumption of 3.96 W at 12 V and a current of 0.33 A, compatible with almost any standard fan header.
• 3 PIN connector for easy integration into the motherboard or fan controller, without the need for additional adapters.
• Declared MTBF 50000 hours, which is a strong indicator of expected durability for long-term use.

Who is it suitable for: if you are building a system where the priority is lower temperatures over absolute silence – for example, a more powerful gaming PC in a more compact case or a system that runs long under load – this fan is a logical choice. It is also suitable for front intake/exhaust configurations where you need stable airflow. If you are aiming for an ultra-quiet build at minimal speeds, you would rather look for a model with a lower RPM range.

The combination of high flow rate, 2 Ball Bearing design, and standard 120 mm form factor makes Evercool 12025H12BA a practical choice for reliable case cooling. This is a workhorse fan that focuses on efficiency and durability, without unnecessary embellishments.