Evercool 140x140x25 2Ball (1800 RPM) - 14025H12BA

Evercool 140x140x25 2Ball (1800 RPM) is a 140 mm fan aimed at those looking for stable airflow and long life without being deterred by higher speeds. With 1800 RPM and a thickness of 25 mm, it is a typical “workhorse” for cases, radiators, or places where you need serious cooling. The dual 2 Ball Bearing provides better durability under continuous load. The combination of high airflow and 12 V power supply makes it suitable for systems that run long under load.

What you get is a fan that not only spins but pushes a serious amount of air: up to 113.87 CFM / 193.47 m3/h, which is more than enough for cooling a loaded CPU, GPU area, or a tightly packed case. At the same time, it operates below 30.9 dBA, which is a reasonable level for an 1800 RPM fan with such airflow. Thanks to the 2 Ball Bearing and MTBF 50000 hours, you can leave it running around the clock – for example, in a workstation, server case, or NAS. It is powered by standard 12 V and draws up to 0.72 A (8.64 W), so it's good to keep the consumption in mind if you plan to have many fans in one system. Connection is easy via a 3 PIN connector, which means basic speed control through voltage, without PWM.

• Fan with standard size 140 x 140 x 25 mm, suitable for most cases and mounting positions for 140 mm fans.
• Maximum speeds of 1800 RPM, providing aggressive cooling at higher temperatures in the case.
• Impressive airflow of up to 113.87 CFM / 193.47 m3/h, convenient for configurations with a lot of heat or limited airflow.
• Noise level below 30.9 dBA, which is a good ratio considering the high speeds and airflow.
• Reliable 2 Ball Bearing for longer life and better performance in vertical and horizontal mounting.
• 3 PIN connector for easy connection to the motherboard or fan controller with voltage control.
• MTBF 50000 hours and consumption of 0.72 A / 8.64 W at 12 V, making it suitable for 24/7 systems, provided the power supply is accounted for.
• 6 months warranty, covering major defects during the initial usage period.

Who it is suitable for – for you if you are looking for more serious cooling: gaming configurations with hot components, workstations, NAS cases, more compact chassis, or even more modest server solutions. It is not the most suitable choice if your goal is maximum silence build and you want the fans to run at very low speeds all the time.

The combination of high airflow, 2 Ball Bearing, and standard 140 mm format makes this Evercool fan a practical choice when you need reliable and aggressive cooling without unnecessary extras and decorations.