Evercool Fan 92x92x25 EL Bearing (2200rpm) - EC9225M12EA

Evercool Fan 92x92x25 EL Bearing (2200rpm) – EC9225M12EA is a classic 92 mm case fan aimed at budget and stable airflow solutions. The compact size of 92 x 92 x 25 mm gives you flexibility for smaller cases or additional positions for intake/exhaust air. It operates at up to 2200 RPM and provides an airflow of up to 40.9 CFM, which is fully adequate for a standard gaming or office build. The lack of RGB and the clean black design make it a simple and functional choice.

What you get is a fan that balances well between airflow and noise: with up to 40.9 CFM and a noise level below 25 dBA, you can keep the case well-ventilated without annoying whirring. The EL Bearing is designed for longer life and more stable operation compared to cheap sleeve solutions, and here the MTBF is up to 40,000 hours, meaning years of continuous use under normal operation. With a consumption of only 1.8 W at 12 V and 0.15 A, it minimally loads the power supply and is not a problem even in more modest PSU configurations. The 3-pin connector makes it suitable for standard fan headers on the motherboard, allowing you to control it via voltage regulation, as long as the motherboard supports it.

• The size 92 x 92 x 25 mm is convenient for compact cases or as an additional fan in positions where 120 mm cannot fit.
• With speeds up to 2200 RPM, the fan provides good static pressure and airflow for overall system cooling.
• The airflow of up to 40.9 CFM / 69.49 m3/h helps effectively exhaust hot air or intake fresh air depending on the installation.
• The noise level below 25 dBA means relatively quiet operation, suitable for a living room or office, without dominating the sound background.
• EL Bearing and MTBF 40,000 hours provide reliability and longer life compared to the most basic fans.
• Operating at 12 V / 0.15 A / 1.8 W ensures low consumption and easy compatibility with almost all motherboards and power supplies.
• 3-pin connector allows easy connection to a standard fan header, and the clean black color fits most builds without drawing attention.

Who it is suitable for – for anyone looking for a simple, reliable, and quiet case fan without unnecessary extras. It is suitable for budget gaming machines, office systems, HTPCs, or for replacing an old/noisy 92 mm fan. If you are after extreme airflow or full control through PWM and RGB effects, this model will not meet those requirements.

The combination of 40.9 CFM airflow, noise level below 25 dBA, and EL Bearing makes this Evercool 92 mm fan a practical choice when you need reliable and unobtrusive case cooling. The clean design and low consumption simply complement the logical and functional package.