Fractal Aspect 12 PWM RGB Black Fan

Fractal Aspect 12 PWM RGB Black is a 120 mm case fan aimed at gaming and enthusiast configurations where you seek a balance between cooling, noise, and clean RGB aesthetics. It operates in a wide range from 500 to 2000 RPM, giving you flexibility – from nearly silent operation to serious airflow when needed. The Addressable RGB lighting is controlled via a 3 PIN 5V ARGB header or controller, so you can easily sync it with the rest of the system. The black housing and 7 blades make it suitable for both discreet and colorful ARGB builds.

What you get is a fan with good control over noise and airflow, thanks to the PWM control and a range of 13 – 56 CFM. At low speeds, it operates below 10 dB(A), which is excellent for idle or light work, while under load it can raise the pressure to 2.34 mm H2O – useful if you have denser filters or thicker front panels. The Rifle bearing is optimized for long life and smoother operation, supported by an MTBF of 90 000 hours. The consumption of 0.37 A at 12 V is standard for this class of fans and will not excessively load the fan headers on your motherboard.

• 120 x 120 x 25 mm size, which is the most popular standard for cases and radiators and fits seamlessly into most configurations.
• Speeds from 500–2000 RPM, allowing you to set the fan from almost silent mode to aggressive cooling under high load.
• Airflow from 13 – 56 CFM, suitable for effectively expelling warm air from the case or supplying fresh air to the components.
• Static pressure from 0.23 – 2.34 mm H2O, which helps when mounting behind filters, dense panels, or finer mesh fronts.
• Noise level between <10 – 33.2 dB(A), so your system remains quiet under light tasks and tolerable under full load.
• Rifle Bearing bearing for longer life and more stable operation, supported by an MTBF of 90 000 hours.
• 4 PIN PWM connector for precise speed control and a separate 3 PIN 5V ARGB for addressable RGB lighting through the motherboard or controller.
• Black body with 7 blades, providing a good balance between low noise and decent airflow in gaming and RGB builds.
• 24 months warranty, providing peace of mind for long-term use in primary or secondary airflow.

It is suitable for gaming cases and RGB configurations where you want good control over noise and effective ARGB lighting, without entering extreme high-end solutions. You can use it as both an intake and exhaust fan, or to supplement existing airflow with a few more units. If you are aiming for a completely unlit, super-minimalist build, the RGB part may be unnecessary, but as cooling characteristics, the fan remains adequate.

The most sensible aspect here is the combination of a wide RPM range, decent pressure, and addressable RGB in a standard 120 mm format. You get a flexible case fan that you can easily adjust according to your scenarios – quiet daily use or aggressive cooling during serious gaming.