Fractal Aspect 14 RGB PWM Black Fan 3X

Fractal Aspect 14 RGB PWM Black 3X is a set of three 140 mm case fans aimed at gaming and enthusiast configurations, where you seek a balance between airflow, noise, and aesthetics. You get 140 x 140 x 25 mm fans with PWM control and addressable RGB, ready to connect to a 4 PIN fan header and a 3 PIN 5V ARGB header on the motherboard or controller. The range of 500 – 1700 RPM, airflow up to 78 CFM, and static pressure up to 2.05 mm H2O make them versatile – from quiet mode to more aggressive cooling. The black design with RGB lighting fits well in most modern cases.

What you get
With this set, you cover the entire front or a combination of intake and exhaust fans in a mid-tower or larger case, without worrying about additional units – the box includes 3 fans. At low speeds (around the minimum of 500 RPM), the noise drops below 10 dB(A), which is suitable for quiet systems and idle. When you load the system, the fans can reach up to 1700 RPM, with up to 78 CFM airflow and 2.05 mm H2O static pressure – useful for denser mesh panels or radiators. The rifle bearing and declared MTBF of 90,000 hours mean long operation at 12 V and only 1.5 W power per fan, which is gentle on the motherboard's power supply. The addressable RGB lighting runs on 3 PIN 5V ARGB, so you can synchronize the effects with the other components.

• A set of 3 x 140 mm case fans suitable for front, top, or as a general intake/exhaust setup.
• A wide range of 500 – 1700 RPM, allowing for both nearly silent operation and more aggressive cooling when needed.
• Airflow up to 78 CFM and static pressure up to 2.05 mm H2O for good ventilation even through filters and denser openings.
• Low noise level in the range <10 – 35.5 dB(A), so your system remains relatively quiet even at higher speeds.
• Rifle Bearing with MTBF of 90,000 hours for long life and stable operation in the long term.
• PWM 4 PIN connector for precise control of speeds according to temperature through the motherboard.
• Addressable RGB with 3 PIN 5V ARGB connector for synchronizing lighting with the motherboard or external controller.

Who it is suitable for
This set is suitable if you are building a mid-range or high-end gaming machine and want to cover the entire case with matching 140 mm RGB fans. It is also suitable for systems where you want a combination of quiet profile at idle and more serious airflow under load. If you are looking for completely unlit or entirely budget fans, RGB and the additional connectors may be unnecessary.

The most sensible aspect here is the combination of three 140 mm fans, a wide RPM range, and addressable RGB in one package – an easy way to organize cooling and the aesthetics of the case with a single solution.