Fan Fractal Aspect 14 RGB PWM White - FD-F-AS1-1409

Fractal Aspect 14 RGB PWM White is a 140 mm case fan aimed at quiet and clean builds with a focus on aesthetics. It operates at up to 1000 RPM, making it suitable for calm, low-noise configurations. The white color and Addressable RGB lighting allow you to perfectly match the style of your case. You get a fan with a good balance between airflow, noise, and aesthetics, plus 24 months warranty.

What you get

With a size of 140 x 140 x 25 mm, the fan covers a larger area than a standard 120 mm model, allowing decent airflow at lower speeds. The flow rate of 41 CFM and maximum pressure of 1.02 mm H2O are okay for general airflow in the case – for example, as a front intake or top exhaust. The noise level of only 19.5 dB(A) means that during typical use, you will hear it minimally, especially if other components are noisier. The Rifle Bearing bearing is a step up from a regular sleeve, with better durability and quieter operation in the long run. Through the 4 PIN PWM connector, you can control the speeds via the motherboard, and the 3 PIN 5V ARGB header gives you lighting synchronization with other ARGB components or controllers.

• Size 140 mm – larger blade for more air at lower speeds, ideal for case airflow.
• Speeds up to 1000 RPM – oriented towards quiet operation, suitable for quiet or office builds and moderate gaming.
• Airflow 41 CFM and 1.02 mm H2O pressure – good balance for intake and exhaust fan in standard cases.
• Noise level 19.5 dB(A) – very low noise, which helps keep the system almost silent during normal operation.
• Rifle Bearing bearing – better durability and smoother operation compared to basic sleeve bearings.
• Addressable RGB lighting – full customization of lighting effects via the 3 PIN 5V ARGB header on the motherboard or controller.
• Consumption 0.96 W at 12 V and 0.14 A – minimal load for the power supply, even if you add a few of these fans.
• White color and 7 blades – clean aesthetics and stable airflow, looks good in light and RGB builds.

Who it is suitable for

This fan is suitable if you are building a quiet gaming or work machine, where low noise and good overall airflow of the case are priorities, rather than aggressive pressure for dense radiators. It is a good choice for front or top fans in mid-tower or full-tower cases, especially if you are going for a white theme and synchronized ARGB lighting. If you are looking for high static pressure for dense radiators or many dusty filters, there are more suitable, higher RPM models.

The combination of 140 mm format, low 1000 RPM, 19.5 dB(A) noise, and Addressable RGB makes it a logical choice for a quiet, visually clean build, without sacrificing stable airflow through the case.