Fan Fractal Momentum 12 RGB White 120mm - FD-F-MR1-1202

Fractal Momentum 12 RGB White 120mm is a case fan aimed at mid-range to more serious gaming and enthusiast configurations, where you want both stable cooling and a clean RGB look. The size of 120 x 120 x 25 mm makes it compatible with most standard cases and radiators. The range of 350 – 2200 rpm gives you flexibility – from almost silent operation to aggressive airflow when needed. The white color and Addressable RGB lighting make it easy to fit into a clean white build or RGB concept.

What you get

With an airflow of 62.44 CFM and maximum static pressure of 2.42 mm H2O, this fan is suitable for both general airflow in the case and for denser filters or solid front panels. The speeds up to 2200 rpm give you a serious reserve at high temperatures, while the low lower limit of around 350 rpm is useful for a quiet idle profile. The noise level of up to 28.03 dB(A) is reasonable for the class – especially if you run it in a lower range through PWM control. The dynamic fluid bearing and MTBF > 90 000 h mean long service life and less worry about wear. With a 4 PIN PWM connector and a separate 3 pin ADD-RGB 5V, you can synchronize it with the motherboard or controller and set the lighting as you like.

• Standard size 120 mm (120 x 120 x 25 mm), making it easily compatible with most cases and radiators on the market.
• Wide range of speeds 350 (±150) – 2200 rpm (± 10%), allowing you to balance between silence and maximum cooling according to the load.
• Airflow of 62.44 CFM, sufficient for effectively expelling warm air from the case or supplying fresh air to the components.
• Maximum static pressure of 2.42 mm H2O, which helps air pass through dense filters, meshes, or radiators without drastic loss in efficiency.
• Noise level of up to 28.03 dB(A), suitable for gaming and work systems, especially with a properly configured PWM profile.
• Dynamic fluid bearing with durability MTBF >90 000 h, ensuring long life and smoother, stable operation over time.
• Addressable RGB with 3 pin ADD-RGB 5V connector and white housing, to build a clean and effective RGB look in the case.

Who it is suitable for

This Fractal fan is a good choice if you are building a gaming or enthusiast setup and looking for a balance between cooling, silence, and RGB aesthetics. It is suitable for both intake and exhaust configurations, and the static pressure allows it to work well behind denser panels or filters. If you are aiming for an absolutely silent, ultra-low-rpm setup, you might find the potential up to 2200 rpm somewhat excessive, but for dynamic profiles and more serious systems, it is just right.

The combination of a wide rpm range, stable airflow, and addressable RGB in a white housing makes the Momentum 12 RGB White 120mm a practical and visually appealing choice for a modern configuration. If you want a fan that cools seriously but also looks good in a transparent side panel, this model fits perfectly.