Fan Fractal Momentum 14 RGB 140mm - FD-F-MR1-1401

Fractal Momentum 14 RGB is a 140 mm case fan aimed at people who want balanced cooling and aesthetics in one component. You get a large 140 x 140 x 25 mm fan with addressable RGB lighting that you can connect to a 5V ARGB header. At up to 1800 rpm and an airflow of 74.39 CFM, the fan easily takes on the role of a primary intake or exhaust in mid and larger cases.

What you get

The large 140 mm size allows for more airflow at lower speeds, which helps create a quieter system during everyday use. The range of 350 (±150) – 1800 rpm gives you flexibility – you can set aggressive curves for lower temperatures during gaming or lower speeds for quiet operation at idle. The static pressure of 2.45 mm H2O is sufficient to push through filters and denser front panels, so you are not limited to just "open" cases. With a noise level of up to 28 dBA and a dynamic fluid bearing, the fan is designed to run long and stable, and an MTBF of over 90,000 h confirms this. The lighting is addressable RGB with a separate 3 pin ADD-RGB 5V connector, making it easy to synchronize with other ARGB components.

• The large format of 140 x 140 x 25 mm provides better airflow at lower speeds compared to 120 mm fans.
• A wide speed range of 350 – 1800 rpm (with tolerances) allows for precise balancing between cooling and noise through fan curve in BIOS or software.
• An airflow of 74.39 CFM is more than sufficient for effective intake or exhaust in modern gaming and workstation configurations.
• Maximum static pressure of 2.45 mm H2O helps when mounting behind dust filters, dense front panels, or thicker mesh constructions.
• A noise level of only 28 dBA at maximum load is suitable for quiet builds without sacrificing cooling.
• A dynamic fluid bearing with an MTBF of over 90,000 h ensures long life and less vibration during daily use.
• 4 PIN connector for PWM control and a separate 3 pin ADD-RGB 5V for addressable RGB allow full control over speeds and lighting.
• Low consumption of 2.04 W at 12 V / 0.17 A does not overload fan headers and is convenient for richer configurations with many fans.

Who it is suitable for

This fan is suitable if you are building a gaming or workstation configuration with an emphasis on good airflow and ARGB aesthetics without generating excessive noise. It fits well in mid-tower and full-tower cases, especially if you already have a 5V ARGB controller or motherboard with a suitable header. If you are aiming for an ultra-minimalist build without any lighting, the RGB part simply won't be of use to you.

The most sensible aspect of this model is the combination of large 140 mm format, stable airflow, and good noise control, plus flexible addressable RGB that you can arrange just the way you like.