Geometric Future Squama 2503B-14 Fan, 140mm, ARGB, Black

Geometric Future Squama 2503B-14 is a 140mm ARGB fan that comfortably fits into the mid/high-end cooling category for cases and radiators. The combination of 800–2400 RPM and a serious airflow of 91.15 CFM shows that it is made for effectively exhausting or intake air even in hotter systems. The black color and Addressable RGB lighting give you flexibility – either a stealthy look or full sync with the rest of the ARGB lighting. It is suitable for dense radiators and for front intake in more closed cases.

What you get

With a size of 140 x 140 x 25 mm, you get a standard thickness that fits without drama in most cases and AIO radiators, but with more surface area than a 120mm fan and greater airflow. The range of 800 to 2400 RPM allows you to run it super quietly at low speeds or aggressively when stable temperatures are needed under load. With an airflow of 91.15 CFM and maximum static pressure of 2.63 mmH2O, the fan performs well even through dense mesh panels and thick radiators. The Dynamic Fluid Bearing ensures smoother operation and lower noise compared to cheaper bearings, which is important if your machine runs many hours a day. Thanks to the 4 PIN connector for speed control and 3 PIN 5V ARGB header for lighting, integration with modern motherboards and controllers is direct and without adapters.

• Size 140 mm – larger fan compared to 120 mm, allowing more air at the same or lower speeds.
• Speeds 800–2400 RPM – wide range for quiet operation at idle and aggressive cooling during gaming or rendering.
• Airflow 91.15 CFM – suitable for strong airflow in the case or effective blowing of the radiator.
• Static pressure 2.63 mmH2O – helps air pass through filters, radiators, and denser panels without significant loss of efficiency.
• Noise level 34 dBA – controllable noise, especially in combination with PWM control via the 4 PIN connector.
• Dynamic Fluid Bearing – better smoothness and durability compared to basic sleeve bearings, suitable for long working sessions.
• Addressable RGB with 3 PIN 5V – full compatibility with modern ARGB systems and software, allowing you to synchronize effects with the rest of the build.
• Current 0.34 A and 12 V power supply – standard parameters, easy to plan according to the capacity of fan headers and controllers.

Who it's suitable for

This fan is suitable if you are building a mid to high-end build where you want real airflow and noise control, not just lights. It is a good option for AIO radiators or dense front panels where static pressure matters. If you are looking for a super budget solution without ARGB and do not care about aesthetics, you will likely find cheaper but also more limited alternatives.

The most sensible aspect here is the combination of high airflow, good static pressure, and ARGB control in a 140mm format. If you need a fan that cools seriously and looks good in the build, the Squama 2503B-14 is a very balanced choice.