Geometric Future Squama 2503W-14 Fan, 140mm, ARGB, White

Geometric Future Squama 2503W-14 is a 140mm white fan with ARGB, aimed at more serious builds where cooling and aesthetics are equally important. With a range of 800–2400 RPM, it can operate quietly or aggressively as needed. The high airflow of 91.15 CFM and static pressure of 2.63 mmH2O make it suitable for both cases and radiators. Add ARGB to this and you get a fan that cools seriously while looking good in the visible part of the build.

What you get

With a size of 140 x 140 x 25 mm, this fan covers standard 140mm positions in cases and radiators, offering greater airflow compared to 120mm solutions at similar RPMs. The range of 800 to 2400 RPM gives you flexibility – you can keep the system almost silent at idle and ramp up the RPMs during gaming or rendering. The static pressure of 2.63 mmH2O means it performs well through radiators and dense front panels, not just in open configurations. Thanks to the Dynamic Fluid Bearing, you get a longer lifespan and smoother operation at high RPMs. With a 4 PIN PWM connector and 3 PIN 5V ARGB, you get separate control over cooling and lighting through the motherboard or a controller.

• 140 mm size – more air for fewer RPM compared to 120mm fans, suitable for front, top, and radiator positions.
• RPM 800–2400 – wide range for quiet mode under low load and aggressive cooling under high load.
• Airflow 91.15 CFM – strong airflow that helps lower GPU and CPU temperatures, especially in more powerful configurations.
• Static pressure 2.63 mmH2O – good efficiency through filters, mesh panels, and radiators without choking.
• Noise level 34 dBA – controllable noise, especially when using PWM profiles for lower RPMs during everyday work.
• Dynamic Fluid Bearing – better durability and lower friction during prolonged use compared to basic sleeve bearings.
• Addressable RGB (3 PIN 5V ARGB) – synchronization of lighting with the motherboard or controller, with a white frame for a clean, neat look.

Who is this fan suitable for?

This fan is suitable if you are building a white or ARGB build and want serious airflow for a gaming configuration or cooler/radiator in a more compact case. It is also a good choice if you are looking for a 140mm solution that combines pressure and flow for AIO or dense front panels. If you are chasing a completely silent build at all costs, you will need to keep it at lower RPMs, but you have enough headroom when cooling is needed.

The most sensible thing about this model is the combination of high airflow, static pressure, and ARGB in a white 140mm format – a flexible solution for serious cooling and organized aesthetics equally.