Lian Li UNI FAN CL Wireless ARGB PWM - 120 mm Black fan

This Lian Li UNI FAN CL Wireless ARGB PWM 120 mm in black is a case and radiator fan aimed at more demanding configurations, where you seek a balance between cooling, noise, and aesthetics. The combination of 120 mm format, PWM control, and addressable RGB gives you flexibility for both airflow and aesthetics. With up to 77.34 CFM and static pressure of 2.52 mmH2O, the fan is suitable for both mesh cases and radiators with denser fins. Add to that the included digital RGB controller, and you have a complete solution for cooling and lighting.

What you get
At speeds from 250 to 2150 RPM, you can set the fan from nearly silent mode to aggressive cooling under load, thanks to PWM control via the 4-pin connector. The maximum airflow of 77.34 CFM is more than enough to expel hot air from a gaming system with a powerful GPU, while the static pressure of 2.52 mmH2O helps if you place it on a radiator or in front of filters. The Fluid Dynamic Bearing is quieter and more durable compared to regular sleeve solutions, which is important for 24/7 operation or long gaming sessions. The noise level of up to 29.8 dBA is quite reasonable for a fan with such a flow rate, especially with the correct fan curve in BIOS or through software. With support for 12 V DC for the motor and 5 V DC for ARGB, plus the included digital RGB controller, you can easily connect it to motherboards and separate controllers.

• Size 120 mm – the most popular standard for cases and radiators, so it will almost certainly fit most modern PC cases and AIO coolers.
• Speeds 250 – 2150 RPM – a wide range that allows for a quiet idle profile and aggressive cooling under load through precise PWM control.
• Airflow 77.34 CFM – sufficient for seriously expelling warm air from the case or effectively cooling a radiator.
• Static pressure 2.52 mmH2O – suitable for radiators and dust filters, where air needs to be „pushed“ through a denser structure.
• Noise level 29.8 dBA – well-balanced noise for this class of fans, especially with an optimized fan curve.
• Fluid Dynamic Bearing – better longevity and lower noise during prolonged operation compared to basic bearing solutions.
• Addressable RGB + included digital RGB controller – full freedom to synchronize lighting with other ARGB components via 3-pin 5V (V-D-NC-G).
• Fan 4-pin PWM and 3-pin ADD-RGB 5V connectors – easy connection to a motherboard or controller without the need for adapters.

Who it is suitable for
This fan is suitable if you are building a gaming or enthusiast configuration and want strong cooling plus ARGB aesthetics, without resorting to industrially noisy solutions. It is a good choice for front intake, top exhaust, or for an AIO radiator, where static pressure matters. If you are aiming for an absolutely silent build at zero RPM, the focus here is more on the balance between performance and noise, not on a fanatical silence fetish.

The most sensible thing about this Lian Li UNI FAN CL is the combination of high airflow, decent static pressure, and PWM control, wrapped in addressable RGB with an included controller. With one unit, you can comfortably test the behavior, and if you like it, upgrade the entire case with the same series of fans.