Lian Li UNI FAN TL LCD FLEX Fan 120mm Black - 12TLLCD1F1B

UNI FAN TL LCD FLEX 120mm by Lian Li is a 120 mm case fan aimed at more demanding builds where you want a good combination of airflow, pressure, and aesthetics. The operating range of 350 ~ 1900 RPM gives you flexibility – from nearly silent operation to serious cooling under load. With 66 CFM airflow and 2.7 mmH2O static pressure, the fan is suitable for both general case cooling and denser radiators or mesh panels. Add to that Addressable RGB and an integrated LCD solution via the LCD FLEX Receiver, and you get not just a fan, but a visual element in the system.

What you get: Fluid Dynamic Bearing provides quieter operation and longer life compared to cheaper solutions, which is important if you plan for the system to run often and for extended periods. At maximum 26 dBA, the fan remains reasonably quiet even close to full speed, and with PWM control via a 4-pin connector, you can adjust the curves in BIOS or software so it spins faster only when it really needs to. The power supply of 12 V DC and 5 V DC3-pin 5V ADD-RGB allows you to synchronize the lighting with the rest of the ARGB equipment in the case. The package includes an LCD FLEX Receiver and an internal USB 2.0 9-pin cable, making it easy to connect and manage the LCD functionality without a ton of additional adapters.

• The standard size of 120 mm makes the fan compatible with most modern cases and CPU and AIO cooling radiators.
• The range of 350 ~ 1900 RPM allows fine-tuning between silence at idle and aggressive cooling under high load.
• Airflow of 66 CFM and static pressure of 2.7 mmH2O mean good efficiency for both intake/exhaust and through denser filters.
• Low noise level of up to 26 dBA helps keep the system quiet even with more fans in the case.
• Fluid Dynamic Bearing provides better durability and smoother operation compared to standard sleeve bearings.
• Addressable RGB lighting and 3-pin ADD-RGB 5V (V-D-NC-G) connector allow synchronization with the ARGB ecosystem of the motherboard.
• The included LCD FLEX Receiver, Internal USB 2.0 9-pin cable, and 5V 3-Pin ARGB cable facilitate integration and management of visual effects.
• Maximum consumption of 5.4 W at 0.18 A on 12 V DC is perfectly fine for standard fan headers on modern motherboards.

Who it is suitable for: This fan is for builders who want a combination of effective cooling and a more serious look with ARGB and LCD accents, without sacrificing control via PWM. It is suitable for gaming and enthusiast configurations with a transparent side panel, where the internal appearance matters. If you are looking for a completely budget solution without lighting and without the need for USB connectivity, here you will pay for extras that you will not use.

The most meaningful aspect of this model is the balance between real cooling parameters (CFM, pressure, RPM range) and the possibilities for visual customization through ARGB and LCD FLEX, all with well-thought-out connectors and included accessories.