Fan Noctua 120mm NF-F12 PWM Chromax.black.swap - NF-F12-PWM.CH.BK.S

This Noctua NF-F12 PWM Chromax.black.swap is a 120 mm fan aimed at those who want a quiet and reliable cooling system without glowing RGB effects. The black design is sleek and looks good in both minimalist cases and more colorful builds, as you can play with the anti-vibration pads. With speeds between 300 and 1500 RPM and a noise level of up to 22.4 dBA, the fan is oriented towards balancing cooling and silence. It is suitable for both a case and a radiator, making it a flexible choice in almost any build.

What you get

You get a 120 x 120 x 25 mm fan with SSO2 bearing, optimized for long life and stable operation – the MTBF is a full 150000 hours, which is a serious plus for 24/7 systems. The range of 300-1500 RPM allows the fan to drop very low in idle for almost silent operation and to ramp up under load when you need a more serious airflow. The flow rate of 54.97 CFM (93.4 m3/h) is more than sufficient for effectively cooling a radiator or for good front intake / rear exhaust in a case. With a consumption of only 0.6 W at 12 V and a current of 0.05 A, the load on the fan headers of the motherboard is minimal. The 4-pin PWM connector gives you full control via BIOS or software for precise calibration of the noise/cooling profile.

• 120 x 120 x 25 mm format, which fits in almost all standard cases and 120 mm radiators.
• Speeds 300-1500 RPM, allowing for almost silent operation at low speeds and good performance at higher speeds.
• Airflow 54.97 CFM / 93.4 m3/h, suitable for both airflow in the case and cooling a radiator.
• Noise level 22.4 dBA, aimed at a quiet system even under heavier load.
• SSO2 Bearing bearing, designed for long and reliable life with an MTBF of 150000 hours.
• 4-pin PWM connector, giving you precise control of the speeds through the motherboard or controller.
• Chromax.black.swap design with an entirely black fan and a set of colored anti-vibration pads for fine customization.
• Low consumption – 0.6 W at 12 V and 0.05 A, which spares the fan headers and is convenient for multiple fans on one controller.
• Rich accessory kit – 6 colors of NA-AVP1 anti-vibration pads plus screws for various builds and mounting options.
• 72 months warranty, which speaks to confidence in durability and quality of workmanship.

Who it is suitable for

It is suitable if you are looking for a quiet, well-ventilated case or stable cooling for a 120 mm radiator, without dealing with RGB. It is a good choice for gaming and workstation builds that run long and often under load. If you are looking for aggressive lighting and maximum high speeds for extreme airflow, the focus here is more on balance and reliability.

The combination of quiet operation, solid speeds, SSO2 bearing, and long warranty makes this Noctua NF-F12 PWM Chromax.black.swap a very stable solution for a fan that you can simply install and forget about its existence.