Noctua 60x60x25mm 5V PWM Fan - NF-A6x25-5V-PWM

This fan Noctua NF-A6x25-5V-PWM is a compact 60 mm cooling solution for cases and systems where space is limited, but you seek reliability and control. It operates at 5 V, making it suitable for specific applications, small cases, network devices, or custom projects. The range of 650–3000 RPM allows you to balance between maximum quiet mode and more aggressive cooling when needed. Typical for Noctua, the fan uses SSO2 Bearing and has a long lifespan.

What you get

With a thickness of 25 mm and size 60 x 60 mm, the fan is suitable for places where standard 80/120 mm options simply won’t fit. With a flow rate of 17.19 CFM (29.2 m³/h), you can expel warm air from a small case or provide fresh air for sensitive components like power modules, drive cages, or small ITX systems. The noise level of 19.3 dBA is in a comfortable zone for quiet builds, especially at lower speeds with PWM control. It operates at 5 V / 0.26 A with a consumption of only 1.3 W, so the load on the line is minimal. MTBF of 150000 hours is a serious argument if the fan will run almost continuously.

• Compact size 60 x 60 x 25 mm, suitable for small cases, network devices, and custom projects with limited space.
• Operating voltage 5 V, making it compatible with systems and devices that do not use standard 12 V fans.
• RPM range 650–3000 RPM, allowing fine-tuning between silence and more serious airflow.
• Airflow 17.19 CFM / 29.2 m³/h, sufficient for effective ventilation of small volumes and local cooling of components.
• Low noise level of 19.3 dBA, suitable for quiet systems, home servers, or workspaces close to you.
• SSO2 Bearing and MTBF 150000 hours, ensuring long life under 24/7 load.
• 4 Pin PWM connector for precise control of RPM through the motherboard or controller and optimal balance between temperature and noise.
• Long warranty of 72 months, indicating confidence in the reliability of the fan.

Who it is suitable for

It is suitable if you are building a compact system, NAS, network device, or have a specific project that requires a 5 V fan with PWM control and serious operational resources. It is also a good choice for replacing stock noisy 60 mm fans in routers, switches, or small servers. If you are looking for basic airflow for a large case or high-end gaming build, it’s better to look for a larger diameter.

The strongest point here is the combination of 5 V power supply, PWM control, and long life, packed into a small, quiet 60 mm fan that you can use in quite demanding scenarios.