Noctua 92x92x14mm NF-A9x14 PWM Fan

This is the thin 92 mm fan Noctua NF-A9x14 PWM – a typical low-profile choice for compact cases and tighter spaces where a standard 25 mm fan simply won't fit. With a thickness of only 14 mm and control via 4 Pin PWM, you can easily adjust it to the profiles of your motherboard – from nearly silent mode to full speed. At maximum 2200 RPM, it delivers up to 29.72 CFM of airflow with noise only 19.9 dBA, which is quite balanced for this class. The typical Noctua design in brown also suggests a long lifespan, backed by a 72-month warranty.

What you get: a fan that is made to fit where others can't, without compromising on control and reliability. The thickness of 14 mm is particularly useful in ITX cases, low-profile coolers, or when the power supply and case frame limit space. PWM control gives you smooth adjustment from 300 to 2200 RPM, so you can set it to be practically inaudible at idle and ramp up only under real load. The SSO2 bearing and declared MTBF of 150000 hours mean this is a plug and forget component. And with the included anti-vibration mounts and extra cables, you can connect it neatly and quietly even in more complex internal configurations.

• Compact form factor of 92 x 92 x 14 mm, convenient for tight cases, low-profile coolers, and spaces with limited depth.
• Wide RPM range from 300 to 2200 RPM, allowing for both super quiet mode and more aggressive airflow when needed.
• Airflow up to 29.72 CFM / 50.5 m3/h, sufficient to ensure stable air exchange in small and medium volumes.
• Low noise level of only 19.9 dBA, making it suitable for quiet gaming or work systems.
• Reliable SSO2 Bearing and MTBF 150000 hours, aimed at long, trouble-free life during 24/7 operation.
• 4 Pin PWM connector for precise speed control via the motherboard or a temperature-based controller.
• Low electrical parameters – only 0.11 A, 1.32 W at 12 V, which minimally loads the power supply.
• Included accessories: 4 anti-vibration mounts, 4pin PWM Y-cable for connecting two fans to one header, and 30 cm extension cable for cleaner cable management.

Who it is suitable for: if you are building a compact or ITX system, HTPC, or just a case with limited space around the radiator and power supply, this 92 mm thin fan is a very logical choice. It is also suitable if you are aiming for a quiet system and want precise PWM control. It is not the best option if you are looking for maximum airflow for large cases – larger fans will be more effective there.

The combination of thin profile, PWM control, and long life makes this Noctua fan a practical upgrade for any compact and quiet configuration where space and noise are critical.