NZXT F140 RGB Core White Fan - RF-C14SF-W1

The NZXT F140 RGB Core White is a 140 mm case and radiator fan, aimed at mid-range and more serious gaming and enthusiast configurations. It combines a solid airflow of 90.79 CFM with good static pressure of 3.22 mm H2O, making it suitable for both mesh front panels and dense radiators. The white color and addressable RGB lighting allow for a clean and organized build with an emphasis on aesthetics. It operates in a range of 500 to 1500 RPM, so you can adjust it from a quiet mode to more aggressive cooling under load.

What you get is a fan with a good balance between cooling and noise, based on a dynamic fluid bearing for a longer lifespan and smoother operation. At the maximum 1500 RPM, it provides serious airflow, which is useful for powerful GPU/CPU builds or dense radiators. At lower speeds of ~500-800 RPM, you can keep the system almost inaudible in idle, while the fan remains stable and free of unpleasant vibrations. Consumption is only 2.88 W at 12 V and 0.24 A, so it does not overly burden the fan headers on the motherboard. The addressable RGB backlighting allows you to synchronize effects with the other components and build a unified visual profile for the system.

• Size 140 x 140 x 26 mm – a larger format than the standard 120 mm, which provides more airflow at similar speeds.
• Speed 500–1500 RPM – a wide range that gives you the choice between quiet operation in idle and strong cooling during gaming or rendering.
• Airflow 90.79 CFM – sufficient for effective cooling of powerful configurations and front intake in cases with limited airflow paths.
• Max. pressure 3.22 mm H2O – makes the fan suitable for radiators or dense filters and panels, where it needs to “push” air through resistance.
• Noise level 34.48 dBA – controllable noise at maximum speeds, which can easily be reduced with a fan curve according to your needs.
• Dynamic fluid bearing – better durability and lower noise over time compared to basic sleeve bearings.
• Addressable RGB and white color – a visually clean appearance with individually addressable lighting effects for synchronization with the rest of the RGB in the case.
• 4-pin connector – standard PWM control for precise speed management via the motherboard or a controller.
• Warranty 24 months – two years of peace of mind with daily use.

Who it is suitable for: if you are building a white or light-colored build and want adequate cooling and RGB aesthetics at the same time, this fan is a very logical choice. It is suitable for front intake, top exhaust, or for radiators in systems with a higher thermal load. If you are chasing an absolutely silent configuration at all costs under full load, you will need to play with fan curves and keep it at lower speeds.

The combination of high airflow, sensible static pressure, and addressable RGB in a white housing makes the NZXT F140 RGB Core White a practical choice for a modern, well-cooled build. Especially if you want both clean aesthetics and real, not just “visual” cooling.