Thermalright TL-M12W-S Infinity Mirror aRGB Lighting White Fan 120mm

Thermalright TL-M12W-S is a 120 mm white case fan with ARGB lighting and infinity mirror effect, aimed at builds where aesthetics are almost as important as airflow. It operates in the range of 500-1500 RPM, providing a good balance between cooling and silence. At maximum, the airflow is 47.6 CFM, and the static pressure reaches 1.31 mmH2O – fully adequate for front or rear intake/exhaust. Despite the striking lighting and white housing, the fan remains relatively quiet at up to 23.2 dBA.

What you get

With S-FDB Bearing and “Magnetic Bearing Optimized” design, you get smoother operation and lower noise compared to mass-produced sleeve bearings, especially during long idle or light load. PWM control via 4-pin connector allows you to spin the fan from 500 to 1500 RPM depending on temperature – quiet when browsing, more aggressive during gaming. Addressable RGB lighting and Infinity Mirror ARGB Lighting effect provide depth and visual accent at the front or side of the case, while the 3 pin ADD-RGB 5V (V-D-NC-G) connector is standard for modern motherboards with 5V ARGB. “PWM and ARGB Sharing Design” simplifies connections and cable management, allowing you to synchronize multiple fans more easily.

• Size 120 mm (124 x 120 x 25 mm) – standard format for most cases and radiators, easy upgrade or addition to existing airflow.
• Speed 500-1500 RPM – wide range for quiet operation at low speeds and stable cooling when the system is under load.
• Airflow 47.6 CFM and pressure 1.31 mmH2O – suitable for front/rear positions in the case and for passing through meshes and filters.
• Noise level 23.2 dBA – optimized acoustic profile for a quieter system, especially in combination with PWM control.
• S-FDB Bearing with Magnetic Bearing Optimized – better smoothness of rotation and longer life compared to cheap fans with sleeve bearings.
• Addressable RGB with Infinity Mirror ARGB Lighting – deep mirrored visual effect, ideal for a white build or showcase case.
• 4 PIN PWM + 3 pin ADD-RGB 5V (V-D-NC-G) – full control over speeds and synchronization of lighting with the motherboard and other components.
• White color and 24 months warranty – clean aesthetics for a light build and peace of mind for reliability for at least two years.

Who it is suitable for

TL-M12W-S is suitable if you are building a white or brightly lit gaming/streaming setup and want fans that look striking without being noisy. It is a good choice for front intake, rear exhaust, or as part of a more elegant showcase with a transparent panel. If you are looking for a purely functional fan regardless of aesthetics, much of the value here comes from the ARGB and infinity mirror design.

The combination of white housing, infinity mirror ARGB, PWM control, and relatively quiet acoustic profile makes this Thermalright fan a very pleasant option for balanced and visually complete airflow in the case.