Fans 3-Pack HYTE THICCC FP12

HYTE THICCC FP12 is a set of three 120 mm fans, aimed at more serious cooling – both for cases and radiators. Here the focus is on pure performance, without lights and effects – Non-LED, entirely in black. The fans operate up to 3000 RPM, with a very high airflow of 105.8 CFM and serious static pressure of 8.14 mmH2O. This makes them suitable for dense radiators and thick front panels, where standard 120s often fall short.

What you get

You get three fans sized 120 x 120 x 32 mm, with the additional thickness of 32 mm compared to standard 25 mm helping for higher flow and pressure at the same RPM. The range of 0 – 3000 RPM gives you full control – from nearly silent idle around 10 dBA to aggressive cooling at maximum up to 47.3 dBA. The hydraulic bearing provides better longevity and less vibration compared to cheap sleeve solutions, which is important at higher speeds. The 4-pin PWM connector allows your motherboard or controller to dynamically adjust the RPM based on CPU/GPU temperature, instead of the fans constantly running at maximum. No RGB means fewer cables, easier cable management, and a focus on airflow, not on lights.

• Set of 3 x 120 mm fans, which is enough to cover an entire radiator or build a meaningful intake/exhaust in the case.
• Increased thickness of 32 mm, providing better airflow and static pressure compared to standard 25 mm models.
• Wide range of 0 – 3000 RPM, allowing both quiet mode under low load and aggressive cooling under load.
• Maximum airflow of 105.8 CFM, suitable for cases with limited airflow or powerful configurations.
• Static pressure up to 8.14 mmH2O, making them a logical choice for radiators and dense filters/mesh panels.
• Noise level in the range of 10 – 47.3 dBA, with PWM control allowing you to adjust the balance between silence and cooling.
• Hydraulic bearing for longer life and lower noise compared to basic fans with simpler bearings.
• Non-LED, black color – clean, unobtrusive look for builds without RGB or with a focus on minimalist design.
• 24 months warranty from the manufacturer HYTE for peace of mind during long-term use.

Who it is suitable for

THICCC FP12 is suitable for gaming and enthusiast configurations where cooling is a priority – especially with powerful CPU/GPU, dense radiators, and more closed cases. It also fits well for builds without RGB, where you seek maximum airflow and pressure with a clean look. If your main priority is absolute silence under any conditions or you absolutely want RGB effects, there are more suitable options.

The strongest point of this set is the combination of increased thickness, high CFM, and static pressure, plus PWM control – a real upgrade if you want cooling that can keep up under serious load without bothering you during quiet moments.