ADATA VENTO 120 ARGB PWM Black 3x120mm Pack

ADATA VENTO 120 ARGB PWM Black is a set of three 120 mm case fans aimed at gaming and enthusiast configurations, where you seek a balance between cooling, noise, and aesthetics. You get a classic 120 x 120 x 25 mm form factor, black housing, and addressable RGB lighting for synchronization with other ARGB components. The range of 300 ~ 1,850 RPM gives you flexibility – from nearly silent operation to serious airflow under load. With a maximum of around 50 CFM and a noise level of 24 dBA, the set is a suitable choice for a well-ventilated and visually organized case.

What you get

With three fans in the set, you can build a complete airflow tunnel – two for intake at the front and one for exhaust at the back, or enhance airflow for hotter GPUs and CPUs. The Rifle Bearing bearings combined with an MTBF of 160,000 hours at 40°C mean long life in a typical gaming environment where the machine often runs for hours under load. PWM control via the 4 PIN connector allows the motherboard to dynamically manage the RPM – low RPM in idle and higher under load, without manual intervention. With a maximum of 0.20A and a consumption of around 2.4W per fan, the load on the power supply is minimal, so you can easily add them to more compact systems. The addressable RGB lighting gives you options for effects and synchronization with the ARGB ecosystem, making your case visually complete.

• Set of 3 x 120 mm fans, with a size of 120 x 120 x 25 mm, sufficient to build the main airflow in a standard ATX or mATX case.
• Wide range of 300 ~ 1,850 RPM ±10%, allowing for both quiet operation and aggressive cooling when needed.
• Airflow of up to around 50 CFM per fan, suitable for cooling powerful components and improving overall case temperature.
• Maximum static pressure of 1.5 mm H₂O ±10%, which helps air pass through filters and denser mesh panels.
• Noise level around 24 dBA, designed for gaming and office environments where you don’t want the fans to dominate the other sounds.
• Rifle Bearing and MTBF of 160,000 hours at 40°C, ensuring reliable long-term operation in systems that often run for extended periods.
• 4 PIN PWM connector and addressable RGB lighting, combining precise RPM control with customizable lighting effects.
• Low consumption: up to 0.20A and 2.4W per fan at power supply in the range of DC 5V～12.6V, gentle on the power supply and controllers.
• Black color and a 24-month warranty, so the fans visually fit most builds and give you peace of mind for maintenance.

Who it is suitable for

This set is suitable if you are building a gaming or enthusiast machine and want a complete set of fans with PWM control and ARGB, without buying them separately. It is also a good choice for upgrading an existing system with poor airflow or old, noisy fans. If you are chasing extreme airflow for very dense radiators or overkill overclocking, you may need more specialized high-pressure models, but for mainstream gaming and daily use configurations, this set is completely sufficient.

The combination of three 120 mm fans, PWM control, addressable RGB, and low noise at reasonable airflow makes the ADATA VENTO 120 ARGB PWM Black a practical solution for a neat and cool build. With rifle bearings and high MTBF, you can install them, set the profiles, and simply forget about them for a long time.