AeroCool Mirage 12 Pro Fan Pack 3-in-1 3x120mm ARGB with Hub, Remote - ACF3-MR10227.11

This trio of AeroCool Mirage 12 Pro fans is aimed at gaming and enthusiast cases, where you want a combination of decent airflow and ARGB visuals without raising excessive noise. You get a set of 3 x 120 mm fans with an included hub and remote, so you can control the lighting and rotation without gymnastics with additional controllers. At 1300 RPM, 45.7 CFM airflow, and only 17.8 dBA noise, the set is a good balance between cooling and silence. The black color and Addressable RGB ensure a clean look and easy integration into any configuration.

What you get

Each fan is a standard 120 x 120 x 25 mm, making it compatible with most ATX and mATX cases on the market. With an airflow of 45.7 CFM / 77.64 m³/h and a maximum static pressure of 1.52 mmH2O, these fans are okay for both case intake/exhaust and for lighter radiators or dense front panels. The low noise level of 17.8 dBA means that even during constant operation, they won't annoyingly buzz in your ear. The hydraulic bearing provides smoother rotation and a longer lifespan compared to cheap sleeve solutions, so they are suitable for 24/7 use. Thanks to the 4 PIN power and 3 pin ADD-RGB 5V connector, you have flexible connection to the motherboard and RGB control, plus the added hub and remote facilitate configuration, even if your motherboard has fewer connectors.

• A set of 3 x 120 mm fans, allowing you to fill the front/top of the case with one set.
• Standard size 120 x 120 x 25 mm for wide compatibility with most cases and mounting positions.
• Speed up to 1300 RPM, providing a good balance between cooling and noise.
• Airflow of 45.7 CFM / 77.64 m³/h and static pressure of 1.52 mmH2O for effective blowing of components and case filters.
• Noise level of only 17.8 dBA, suitable for quiet gaming and work configurations.
• Hydraulic bearing for better durability and quieter operation compared to basic solutions.
• Addressable RGB with 3 pin ADD-RGB 5V and 4 PIN power, plus a hub and remote for easy control of effects and synchronization.

Who it is suitable for

This set is suitable if you are building a gaming or streaming machine and want decent case cooling and ARGB effects simultaneously, without raising the RPMs to airplane levels. It is suitable for mid-range and quieter builds, including for people who care about a clean look and control over the lighting. If you are looking for extreme static pressure for very thick radiators or maximum airflow for open bench stands, there may be more aggressive models, but for a normal case, this set is fully adequate.

The most sensible thing here is the combination of three fans with a hydraulic bearing, low noise, and Addressable RGB, plus a hub and remote, so that with one set you solve both the cooling and the look of the case.