ARCTIC P12 Reverse Pro 120mm PWM 3-pack Fans - ACFAN00332A

Arctic P12 Reverse Pro 120mm PWM in this 3-pack set are case and radiator fans, aimed at people who want serious airflow and control over RPM without unnecessary RGB effects. They work in a wide range from 500 to 3000 RPM, giving you flexibility – from quiet idle to aggressive cooling under load. The specification here is reverse rotation direction, which is ideal if you want a clean look of the blades from a specific side of the case or radiator. In combination with the compact standard size 120 x 120 x 25 mm and 4-pin PWM connector, this kit is a practical core for airflow configuration.

What you get

With airflow up to 73 CFM (~124 m³/h) and maximum static pressure 4.5 mm H₂O, these fans are suitable for both mesh cases and dense radiators, where pressure is critical. PWM control from 500 to 3000 RPM allows you to set profiles – quiet mode at low temperatures and aggressive cooling when CPU or GPU heat up. Dynamic fluid bearing helps for longer life and lower noise compared to cheap sleeve bearings, especially at higher RPM. Reverse rotation direction gives you the opportunity to visually turn the fans so that the "beautiful" side of the frame and blades face outwards, without breaking the intake/exhaust flow logic. In the box you get 3 units, which is enough for a full front intake line or for radiator + additional cooling in the case.

• Standard size 120 x 120 x 25 mm, making them compatible with almost all modern PC cases and 120mm radiators.
• Wide range from 500 to 3000 RPM (PWM), allowing fine tuning between silence and maximum cooling according to profiles in BIOS or software.
• Airflow up to 73 CFM (~124 m³/h), sufficient for serious cooling of components and effective airflow through the case.
• Maximum static pressure 4.5 mm H₂O, which helps when used on dense radiators or filtered panels.
• Dynamic fluid bearing for better durability and lower noise compared to basic bearings, especially during prolonged operation.
• Reverse rotation direction, convenient for specific installations when you seek a certain visual appearance without sacrificing the correct airflow direction.
• Kit of 3 fans in clean black color without RGB, plus long 72 months warranty for peace of mind in the long term.

Who is it suitable for

This 3-pack is a good choice if you are building a gaming or work machine and want a combination of high airflow, control, and more serious reliability, without paying for lighting. It is also suitable if you are looking for fans for AIO or custom water cooling, where static pressure and RPM range are important. If you are chasing full RGB vision and synchronization on the case, the lack of lighting here can be a minus.

The most meaningful in these Arctic P12 Reverse Pro is the combination of high RPM range, good static pressure, and reverse design in a kit of 3 units – a practical solution that covers both case and radiator without unnecessary compromises.