Arctic P14 Pro Reverse A-RGB Fan Pack 3-in-1 - ACFAN00327A

Arctic P14 Pro Reverse A-RGB Fan Pack 3-in-1 is a set of three 140 mm fans for cases and radiators, aimed at more serious gaming and enthusiast configurations. You get high static pressure up to 5.1 mmH2O and airflow up to 98 CFM, making them suitable for dense radiators and tightly closed case fronts. The reverse rotation direction is convenient when you want to see the RGB side but maintain the correct airflow direction. Addressable RGB lighting with 3 pin ADD-RGB 5V connector gives you flexibility for synchronization with the motherboard and other components.

What you get: three fans measuring 140 x 140 x 27 mm with a dynamic fluid bearing, optimized for long life and lower noise compared to standard sleeve or ball bearings. The wide range of 400–2650 RPM allows you to keep them nearly silent at idle and have serious airflow under load when the CPU and GPU heat up. Thanks to the combination of high CFM and static pressure, you can use them behind dense mesh panels as well as on a radiator for more effective water cooling. The “Minimum Gap Dimensions for Maximum Efficiency” design actually means smaller gaps between the blades and the frame, reducing losses and increasing airflow efficiency. With 4 PIN PWM connector, you can adjust the speeds through the motherboard to find the balance between noise and temperature.

• A set of 3 x 140 mm fans, suitable for both case and radiator, so you can fill a front or 420 mm radiator setup.
• Dynamic fluid bearing for longer life and smoother operation compared to more basic solutions, especially in long 24/7 mode.
• Range of 400–2650 RPM, allowing quiet operation at low load and aggressive cooling when the system is under full load.
• Airflow up to 98 CFM and static pressure up to 5.1 mmH2O, which is a serious plus for dense filters, radiators, and confined spaces.
• Reverse rotation direction (Reverse), so you can see the RGB side and logo, even when the fans operate as intake or exhaust depending on airflow needs.
• Addressable RGB lighting with 3 pin ADD-RGB 5V connector for precise control and synchronization with the motherboard and other ARGB components.
• 72 months warranty, which is a serious term for a consumable like a fan and shows confidence in the design and bearing.

This set is suitable if you want to upgrade airflow in a mid-range or high-end case with 140 mm positions and maintain stable temperatures during long gaming sessions or heavy rendering. It also works well for AIO or custom water cooling with radiators, where high static pressure really matters. If you are aiming for a completely silent, low-RPM system and don’t need RGB or maximum pressure, they might be overkill.

The combination of high RPM, strong airflow, and static pressure, plus reverse rotation direction and ARGB control, makes this 3-in-1 package a very flexible solution for modern, well-cooled, and visually organized builds.