Arctic P14 Pro Reverse A-RGB White Fan Pack 3-in-1 - ACFAN00328A

The Arctic P14 Pro Reverse A-RGB White 3-in-1 is a set of three 140 mm fans aimed at more serious cases and radiators, where you need both airflow and pressure, as well as aesthetics. They operate in a range of 400–2650 RPM, providing wide control from nearly silent operation to aggressive cooling when needed. The Reverse rotation direction is key if you want to mount the fans "towards the glass" but still view the beautiful side with RGB without sacrificing airflow. The white color and Addressable RGB lighting match well with clean, bright builds.

What you get

Each fan measures 140 x 140 x 27 mm, which is slightly thicker than the standard 25 mm and helps achieve higher static pressure – up to 5.1 mmH2O, sufficient for dense mesh panels or thick radiators. The airflow reaches up to 98 CFM, which is more than enough to cool a powerful gaming build with a lot of heat from the CPU and GPU. The dynamic fluid bearing is designed for long life and lower noise at high speeds. With a 4-pin fan connector, you have PWM control through the motherboard, and with 3-pin 5V ADD-RGB, you can easily connect the lighting to a controller or motherboard with addressable RGB. They operate on standard 12 V and up to 0.4 A per fan, so you can plan your power supply and hubs comfortably.

• A set of 3 x 140 mm fans – enough to refresh the entire airflow of a mid or full tower case.
• Operating range of 400–2650 RPM, allowing for quiet operation at idle and aggressive cooling under load.
• Airflow up to 98 CFM per fan for effective removal of warm air from the case or through the radiator.
• Static pressure up to 5.1 mmH2O, suitable for mounting on radiators or behind denser filters and front panels.
• Reverse rotation direction, so you can view the "beautiful" side of the fan even when blowing inward through the glass panel.
• Addressable RGB (3-pin 5V) lighting for synchronization with the motherboard or controller and fine-tuning of effects.
• Dynamic fluid bearing for longer life and lower noise compared to basic sleeve bearings.
• Standard power 12 V / 0.4 A, suitable for most modern motherboards and fan hubs.
• Long 72 months warranty, giving you peace of mind for years to come.

Who it is suitable for

This set is for you if you are building a white or RGB-oriented setup and want fans that look good through the glass panel but do not lose efficiency due to orientation. It is suitable for both case airflow and radiator mounting, where high static pressure is important. If you are aiming for a completely "stealth" setup without lights and the lowest possible price, the RGB and reverse design may not be your priority.

The combination of large 140 mm format, high pressure, and reverse design makes these Arctic P14 Pro Reverse A-RGB a practical choice if you want effective cooling and a tidy, visually thought-out interior of the case.