Darkflash INF34 Black, Daisy-Chain, ARGB Fan Pack 3-in-1 3x120mm

Darkflash INF34 Black is a set of three 120 mm fans with addressable RGB, aimed at mid-range gaming and enthusiast cases. They are suitable for both front or top intake/exhaust, as well as for mounting on a radiator, allowing you to use them flexibly according to your build. You get hydraulic bearings for longer life and smoother operation, plus speeds of up to 2000 RPM for serious airflow. The black color and ARGB lighting give you a clean look that easily matches the rest of the hardware.

What you get: three 120 mm fans sized 120 x 120 x 28 mm each, set for a balance between flow and pressure – 50.43 CFM and up to 2.27 mmH2O. This makes them suitable for both intake/exhaust of air from the case and for operation on a radiator, where the necessary static pressure is more important. The range of 800–2000 RPM allows you to run them quietly under light load, while under heavier load you can increase the speeds for better cooling. With noise levels of up to 31.6 dBA, you can expect a noticeable but controlled sound at maximum, which can easily be tamed with an appropriate fan curve. The hydraulic bearing and standard 12 V power supply with a consumption of around 0.15 A per fan provide a good balance between reliability and efficiency.

• Set of 3 x 120 mm fans, sufficient to fill the front of most mid-tower cases or to create a push/pull on a smaller radiator.
• RPM range of 800–2000 RPM, giving you the freedom to adjust the profile – from quieter operation to aggressive cooling during gaming or rendering.
• Airflow of 50.43 CFM per fan, suitable for building stable airflow throughout the case.
• Maximum static pressure of 2.27 mmH2O, which helps with denser front panels or mounting on a radiator with dense fins.
• Noise level of up to 31.6 dBA, acceptable for gaming builds, especially if you use fan curves through the motherboard.
• Hydraulic bearing for better durability and smoother rotation compared to basic sleeve solutions.
• 4 PIN connector for the fan and 3 PIN 5V ARGB header for the lighting, allowing you to connect them directly to the motherboard or controller and synchronize your effects.
• Addressable RGB lighting, allowing you individual control of colors and effects through compatible software or controller.
• Black finish that looks clean and neutral in any build, from minimalist to RGB-heavy configurations.
• 24 months warranty, giving you peace of mind for long-term use.

Who it is suitable for

This set is suitable if you are building a gaming or streaming configuration and want to improve the airflow of the case without entering the premium price range. It is also a good choice for AIO or custom water cooling, where you need a combination of flow and pressure. If you are aiming for a completely silent build or extreme high-end radiator configurations, you may want to look for more specialized models, but for the average gaming scenario, these fans cover a very good base.

The combination of three fans, wide RPM range, decent CFM/pressure, and 5V ARGB makes them a practical choice for a modern case with a transparent panel. This is a solid balance between cooling, aesthetics, and control, without unnecessary complications.