Fans DeepCool FD14 White ARGB Fan Pack 3-in-1 3x140mm

DeepCool FD14 White ARGB is a set of three 140 mm case fans aimed at more serious gaming and enthusiast configurations that want both airflow and a clean white build with ARGB. Each fan measures 140 x 140 x 25 mm, with speeds up to 1650 RPM and addressable RGB lighting. The white color combined with Addressable RGB makes them a good choice if you're aiming for a tidy, illuminated interior. Add in the hydraulic bearing and low noise of 25.2 dBA, and you get a balanced package for airflow and aesthetics.

What you get

The three FD14 White ARGB fans are designed for stable case cooling with airflow up to 82.53 CFM and static pressure 1.96 mmAq, so they can handle dense mesh panels or finer filters. The speed range of 400–1650 RPM gives you freedom – from nearly silent idle to serious airflow under load. Thanks to the hydraulic bearing and full-cover rubber pads in each corner, vibrations and noise remain under control, even at higher speeds. Management and connectivity are simplified with an 8-pin cable that can be chained between the fans, while the 4-pin connector for power and 3-pin 5V ARGB header allow you to synchronize them with the motherboard or a separate controller and tie the effects with the rest of the system.

• A set of 3 x 140 mm fans, ideal for front intake or top exhaust in larger cases.
• Speed range of 400–1650 RPM, allowing for both quiet mode and aggressive cooling when needed.
• Airflow up to 82.53 CFM and static pressure 1.96 mmAq for effective air passage through filters and radiators.
• Low noise level of only 25.2 dBA, aided by full-cover rubber pads in each corner.
• Long-life hydraulic bearing that provides smoother operation and less wear over time.
• Addressable RGB lighting with six bright LEDs around the center of each fan for fine synchronization with the system.
• Convenient cabling with an easy-to-manage 8-pin cable that can be chained between FD fans for a cleaner internal look.
• Standard connection via 4 PIN for power and 3 PIN 5V ARGB header to the motherboard or controller, plus 12 V power and consumption of about 2.04 W per fan.

Who it is suitable for

This set is suitable if you are building a white gaming or enthusiast build and want serious airflow from 140 mm fans with controllable ARGB. It is a good choice for mid-tower and full-tower cases with support for 140 mm positions at the front, top, or back. If you are aiming for a completely minimalist look without any lighting or only have 120 mm positions, this model may not be the best fit for you.

The combination of 140 mm size, serious airflow, addressable RGB, and tidy chain cabling makes the DeepCool FD14 White ARGB Fan Pack 3-in-1 a very practical choice for a clean, cool, and visually complete build.