Geometric Future Squama 2503RW-14 White Reversed 140mm Fan Pack 3-in-1

Geometric Future Squama 2503RW-14 White Reversed is a set of three 140 mm fans aimed at more serious cases and radiator configurations where you need both airflow and stable pressure. The white color and addressable RGB lighting make them a logical choice if you are aiming for a clean, neat build with lighting through the motherboard or controller. The reverse rotation direction is convenient when you want the RGB to be visible from the “pretty” side while maintaining the necessary airflow direction. Combined with the dynamic fluid bearing, you get fans designed to spin long and smoothly.

What you get – three 140 x 140 x 25 mm fans that can operate in a range of 800 to 2100 RPM, allowing you to adjust them from nearly silent idle behavior to aggressive cooling under load. With airflow up to 71.88 CFM and static pressure of 2.00 mmH2O, you have the flexibility to use them for front intake in the case or for mounting on a radiator. Each fan has a 4 PIN PWM connector for precise RPM control through the motherboard, while the 3 PIN 5V ARGB connector gives you synchronization of lights with other components. At 34 dBA at maximum RPM, you can expect a normal noise level for 140 mm fans in this class, while at lower RPMs they will be much more discreet. The power supply is standard 12 V, with consumption up to 3.6 W (0.3 A), which is safe for almost any modern motherboard configuration.

• 140 mm size – larger fan compared to 120 mm alternatives, allowing for better airflow at lower RPMs.
• Range 800–2100 RPM – wide range from quiet mode for office/idle to aggressive cooling during gaming or rendering.
• Airflow 71.88 CFM – suitable for cases with more components or denser radiators where more warm air needs to be pushed out.
• Static pressure 2.00 mmH2O – allows mounting on radiators or behind dense mesh/filters without collapsing efficiency.
• Dynamic fluid bearing – smoother operation and better durability compared to basic sleeve bearings, especially during long hours of use.
• Reverse rotation direction – maintains airflow in the desired direction while showing RGB from the side you see through the glass.
• Addressable RGB with 3 PIN 5V ARGB – easy synchronization of lighting with the motherboard or external controller for a unified look across the entire build.
• 4 PIN PWM connector – full control through BIOS or software for automatic fan curves based on temperature.
• Set of 3 – ready set for full front intake, top exhaust, or complete radiator without searching for individual units.
• 24 months warranty – peace of mind that you will have support within a reasonable period in case of defect.

This set is suitable if you are building a white or RGB-oriented build and need 140 mm fans for a case or radiator that keep temperatures under control during serious gaming or productivity. If you are chasing an absolutely silent machine under full load, you will need to set smarter fan curves and rely on lower RPMs, but for normal gaming and work scenarios, the balance between noise and cooling is good.

The most sensible thing about this set is the combination of 140 mm format, serious airflow, and ARGB with reverse rotation – exactly what you need if you want your case to look clean and organized without sacrificing cooling.