Geometric Future Squama 2503W-14 White 140mm Fan Pack 3-in-1

Geometric Future Squama 2503W-14 White is a set of three 140 mm fans, aimed at mid-range and enthusiast cases, where you want both good airflow and a clean look. The white color and addressable RGB lighting make them suitable for showcase builds with a transparent side panel. The high airflow of 91.15 CFM and static pressure up to 2.63 mmH2O mean they are suitable for both cases and radiators. You get a flexible 3-in-1 kit with 4 PIN control and 5V ARGB for full control through the motherboard or controller.

What you get: three fans sized 140 x 140 x 25 mm, which you can use for intake or exhaust air, or mount on a radiator for more serious water cooling. The range of 800-2400 RPM gives you enough freedom – lower speeds for quiet operation and higher when the CPU or GPU is under serious load. With a maximum 91.15 CFM airflow and 2.63 mmH2O pressure, you can cool dense radiators and more closed front panels more effectively. The dynamic fluid bearing helps for longer life and smoother operation at high speeds. Through the 4 PIN connector, the fans are controlled via PWM, and 3 PIN 5V ARGB allows synchronization of the lighting with other components.

• A set of 3 x 140 mm fans, which is enough to create a complete airflow tunnel in the case or fill a large radiator.
• Range of 800-2400 RPM, so you can balance between silence in idle and aggressive cooling under full load.
• High airflow of 91.15 CFM for effective removal of warm air even from more loaded and tightly assembled systems.
• Maximum static pressure of 2.63 mmH2O, making them suitable as coolers for radiators or for cases with dust filters and more closed panels.
• Noise level up to 34 dBA, which for a 140 mm fan at these speeds is an acceptable compromise between performance and acoustics.
• Dynamic fluid bearing for better durability during long-term operation and smoother fan rotation.
• 4 PIN PWM for speed control and 3 PIN 5V ARGB for addressable RGB lighting through the motherboard or controller, to visually synchronize the entire build.
• Low consumption – only 4.08 W per fan (0.34 A at 12 V), which is easy for any modern fan header.
• White color and addressable RGB, which fit perfectly with light or themed builds.
• 24 months warranty for peace of mind during daily use.

Who it is suitable for

This kit is suitable if you are building a white or RGB-oriented build and need a combination of strong airflow and flexible control of speeds and lighting. It is a good option for gaming configurations with more serious heat dissipation, including when using AIO with 140 mm radiators. If you are aiming for an absolutely silent system at all costs, the maximum 2400 RPM may be excessive and you will need to limit them through BIOS or software.

The most sensible aspect here is the combination of 140 mm format, high airflow, and static pressure, plus a clean white look with addressable RGB, all packed into one 3-in-1 package. With them, you can easily bring order to both airflow and the appearance of the case.