Fans Geometric Future Squama 2503W White Fan Pack 3-in-1 - 1F2503W312000

Geometric Future Squama 2503W White is a set of three white 120 mm fans aimed at mid-range and more serious gaming and enthusiast configurations. They come with a 0–2000 RPM range, 69.11 CFM airflow, and 2.92 mmH2O static pressure, making them equally suitable for both case and radiator. The hydraulic bearing and up to 29 dBA noise mean a decent balance between cooling and acoustics. Add in the addressable RGB with 3 PIN 5V ARGB and you get fans that look good and do real work in airflow.

What you get

Each fan measures 120 x 120 x 25 mm, which is a standard format that fits most cases and 120/240/360 mm radiators. With up to 69.11 CFM flow and 2.92 mmH2O pressure, you can use them for both intake/exhaust and for denser radiators where static pressure is important. The range of 0–2000 RPM gives you flexibility – at idle you can keep them slow and quiet, and under load, you can ramp them up to keep the GPU and CPU cooler. They are powered at 12 V with a 4 PIN PWM connector, so you can easily connect them to the motherboard and control the curves through BIOS or software. The lighting is addressable RGB via a 3 PIN 5V ARGB header or controller, allowing you to synchronize them with the rest of the ARGB in the system.

• Set of 3 x 120 mm fans, enough for a full front intake or for a 240/360 mm radiator plus additional cooling in the case.
• Size 120 x 120 x 25 mm, compatible with the most common mounting positions for cases and radiators.
• Range of 0–2000 RPM for flexible control between silence at low speeds and aggressive cooling under load.
• Airflow up to 69.11 CFM, suitable for good overall ventilation of the case in hotter systems.
• Static pressure 2.92 mmH2O, which helps when mounting radiators or front panels with denser filters.
• Noise level up to 29 dBA, which is a reasonable compromise between cooling and acoustic comfort.
• Hydraulic bearing for better durability and smoother operation compared to ordinary sleeve bearings.
• 4 PIN PWM connector for precise speed control and 3 PIN 5V ARGB for addressable RGB synchronization with the motherboard or controller.
• White color for a cleaner and “light” build that maximizes RGB lighting.
• Warranty 24 months, giving you peace of mind for long-term use.

Who it is suitable for

This set is suitable if you are building a white or light build and want both adequate cooling and ARGB aesthetics – gaming cases, streaming configurations, more subdued enthusiast systems. It is also a good choice if you want to replace the stock fans on an AIO radiator with something more serious in terms of flow and pressure. If you are aiming for absolutely minimal noise under any load, you may need to set more aggressive fan curves at low RPM.

The most sensible aspect here is the combination of stable airflow and pressure, PWM control, and addressable RGB in a white package of three – enough to organize the entire airflow of the case without worrying about mixing different models.