NZXT F140 RGB Black 140mm Fans + NZXT RGB Controller 2 pack
- Size by standard
- 140 mm
- Size [mm]
- 140 x 140 x 25 mm x 2 mm
- RGB lighting
- Addressable RGB
- Set of (pcs)
- 2 pcs
- Warranty
- 24 months
Description
NZXT F140 RGB Black 140mm is a set of two 140 mm case fans with an included NZXT RGB controller – a solution if you want both meaningful cooling and organized RGB in the system. The two fans use a dynamic fluid bearing and operate in the range of 500 - 1800 RPM, providing a good balance between airflow and noise. At a maximum of 32.5 dBA, they maintain relatively quiet operation, while the airflow of up to 89.48 CFM is more than sufficient for more serious configurations. The black housing and addressable RGB lighting allow you to easily connect them to both simpler and more colorful builds.
What you get
With these two 140 mm fans, you can significantly improve airflow in your case – up to 89.48 CFM per fan means serious air movement, especially if you use them as front intake or top exhaust. The range of 500 - 1800 RPM allows you to set them for nearly silent operation at light idle and higher speed only under load. The dynamic fluid bearing ensures smoother rotation and less noise during prolonged operation. The included RGB controller is convenient if you want to manage the addressable RGB lighting of the two fans from one place, rather than relying solely on the motherboard. With a 4 PIN connector and standard 12 V power supply, integration with most modern motherboards and controllers is hassle-free.
- Set of 2 x 140 mm fans, covering the main airflow from the front or top of the case.
- RPM range of 500 - 1800, allowing fine-tuning between silence and cooling depending on the load.
- Airflow 24.85 - 89.48 CFM, suitable for gaming and hotter systems where good airflow is critical.
- Noise level between 20 - 32.5 dBA, so at lower speeds the system remains quiet even on the desk next to you.
- Dynamic fluid bearing for smoother operation and longer life compared to basic sleeve solutions.
- Addressable RGB lighting with included NZXT RGB controller, to synchronize effects without additional accessories.
- Standard 4 PIN connector and 12 V power supply for easy compatibility with modern motherboards and fan controllers.
Who it is suitable for
This set is suitable if you are building a gaming or work machine and want more meaningful airflow with 140 mm fans and an organized RGB system from one manufacturer. It is especially a good choice if you do not have a built-in RGB controller in the case or motherboard, but want addressable lighting. If you are looking for a completely silent build under any load or do not care about RGB at all, there are simpler and quieter options at lower RPMs.
The most sensible thing here is the combination of a large 140 mm form factor, good RPM range, and included RGB controller, so with one set you get both cooling and a visually complete build.
Full specifications
- Manufacturer
-
NZXT
- Product code
- RF-R14DF-B1
- Application
-
Case cooler
- Size by standard
-
140 mm
- Bearing type
- Dynamic Fluid bearing
- Size [mm]
- 140 x 140 x 25 mm x 2
- Fan speed
- 500 - 1800 RPM
- Airflow (CFM)
- 24.85 - 89.48 CFM
- Noise level
- 20 - 32.5 dBA
- Voltage
-
12 V
- RGB lighting
- Addressable RGB
- Number of supported fans
- 2
- Set of (pcs)
- 2
- Warranty
- 24 months
- Others
-
RGB lighting
- Color
-
Black
- Connector 2
- 4 PIN
- Type
- Fan
Reviews
No reviews for this product yet. Be the first!
Similar products
NZXT F120 RGB Black + NZXT RGB Controller 3 pack Fans - RF-R12TF-B1
NZXT F120 RGB White + NZXT RGB Controller 3 pack Fans - RF-R12TF-W1
Fans Razer Kunai Chroma RGB 140MM - 3 Fans pack - RC21-01810200-R3M1
