Xigmatek Infinity G22A, Infinity Mirror, A-RGB Fan Pack 3-in-1 3x120mm

The Xigmatek Infinity G22A three-fan set is aimed at mid-range gaming and enthusiast configurations, where you seek a good balance between cooling, noise, and looks. You get three 120 mm fans with Infinity Mirror effect and Addressable RGB, which you can synchronize with the 5V A-RGB system of the case or motherboard. With a thickness of 25 mm and standard dimensions, they fit almost any modern case. Despite the visual emphasis, the airflow and noise parameters make them fully usable for actual cooling, not just for “lighting up”.

What you get

Each fan in the set is 120 x 120 x 25 mm in size, which is the gold standard for case cooling and gives you flexibility – front intake, top exhaust, rear exhaust, depending on your case. With an airflow of 40.6 CFM per fan, you can achieve a stable airflow tunnel through the case, especially if you combine them correctly as intake and exhaust. The noise level of only 19.8 dBA is suitable for quiet builds, where you don't want the fans to be heard over the GPU and CPU cooling. The Hydro bearing and MTBF 30000 hours mean long operation with daily use. Through the 4 PIN power connector and 3 pin ADD-RGB 5V, you can connect them to the motherboard or a controller, with the total limit of 5V: Total 40W maximum indicating how much A-RGB load you can put on the chain.

• A set of 3 x 120 mm fans, which is more than enough to fill a front intake or build a complete airflow in a mid-tower case.
• Hydro bearing for smoother operation and lower noise compared to basic sleeve bearings, plus better durability in vertical mounting.
• Airflow of 40.6 CFM / 68.98 m³/h per fan, which is a good balance between cooling and quiet operation for case fans.
• Low noise level of only 19.8 dBA, suitable for gaming and work in a quieter environment, without annoying “whining”.
• Addressable RGB lighting with a 3 pin ADD-RGB 5V connector, so you can synchronize them with the other A-RGB components and effects in the case.
• Standard power connector 4 PIN, 12 V, consumption 2.16W and current 0.18 A, which makes them easy to control from most motherboards and controllers.
• MTBF 30000 h and 24 months warranty, which provides peace of mind for long daily use in a gaming or work system.

Who it is suitable for

This set is suitable if you are assembling a gaming or showcase build with a window and want both good looks and adequate air cooling. It fits mid-range configurations that run for long periods – gaming, streaming, general productivity. If you are looking for maximum static pressure for very dense radiators, the focus here is more on case airflow and A-RGB effects.

The combination of Infinity Mirror A-RGB, quiet profile, and standard 120 mm dimensions makes the Xigmatek Infinity G22A a sensible choice when you want to refresh your case both functionally and visually, without falling into the “show only” category.