Water Cooling Asrock PRO 360 ARGB, 360mm, ARGB, AIO Cooler

Asrock PRO 360 ARGB is a 360mm AIO liquid cooler aimed at mid-range to high-end configurations, where you seek silence and stable temperatures with a serious CPU. The radiator is 360 mm with three 120 mm fans, providing a good area for heat dissipation. The pump operates in the range of 1200 - 3200 RPM, while the fans reach up to 2100 RPM, giving you enough range from completely silent mode to aggressive cooling. The added Addressable RGB lighting and 5V ARGB connectors allow you to connect everything with the rest of the RGB in the case.

What you get is a complete AIO solution with three 120 x 120 x 25 mm fans, covering the entire 360 mm radiator for maximum airflow. Each fan can be controlled via a 4 PIN PWM connector, allowing you to set a curve for the speeds based on the CPU temperature – from 0 RPM for completely silent operation at low load to maximum when you push the system. A flow rate of 62.6 CFM and static pressure of 1.77 mmH2O help the air pass effectively even through denser radiator fins. Noise up to 31 dB(A) is relatively low for this class, especially if you set more moderate speeds for everyday use. The water block measuring 71.3 x 84.1 x 53.9 mm is compact, so it does not interfere with the RAM slots around the socket.

• Large 360 mm radiator with three fans, suitable for powerful CPUs and long gaming or rendering sessions.
• Compatibility with sockets AM4, AM5, LGA 1700, and LGA 1851, making it a suitable choice for both current and future platforms.
• Three 120 x 120 x 25 mm fans with 4 PIN PWM control for fine control over noise and cooling.
• Speed range 0 - 2100 ± 10% RPM, allowing from completely silent mode to aggressive cooling under high load.
• Airflow 62.6 CFM and static pressure 1.77 mmH2O for stable performance through the radiator.
• Maximum noise level around 31 dB(A), which is a reasonable compromise between performance and acoustic comfort.
• Addressable 5V ARGB lighting on the fans and block for synchronization with the rest of the RGB in the configuration.
• Pump with a range of 1200 - 3200 ± 10% RPM and power supply DC 12V for reliable liquid circulation.

It is suitable for gaming and workstation configurations where you plan to use a stronger CPU on AM4/AM5 or LGA 1700/1851 and want to keep temperatures under control without excessive noise. If you were aiming for a maximum budget build or a small ITX case, this 360mm solution might be too large, but for mid and full tower cases, it is a very logical choice.

The combination of a 360 mm radiator, wide RPM range, and ARGB makes Asrock PRO 360 ARGB a good liquid cooler if you are looking for a balanced mix of performance, noise, and visual control. You install it, set the curves, and get stable thermal headroom for your gaming and work.