Liquid cooling Corsair NAUTILUS II 360 RS LCD, 360mm Radiator, Liquid CPU Cooler - CW-9061053-WW

Cooling System CORSAIR (CW-9061053-WW) is a liquid AIO cooler with a large 360 mm aluminum radiator, aimed at mid-range and high-end gaming and work configurations. You get a kit with 3 x 120 mm PWM RS II Unified Frame fans, pre-mounted for easier builds and cleaner cable management. The cooler supports current sockets LGA 1851, LGA 1700, AM5 and AM4, so you can easily move it between new CPU generations without replacing the entire system. The highlight is also the large 3.5" IPS LCD display (480 x 640, 60 Hz) on the pump, which gives you both visual appeal and useful telemetry.

What you get

With a fan speed range of 420 – 2100 RPM, airflow of 10.8 – 73 CFM and static pressure up to 4.2 mm H₂O, you have enough options to balance between silence and aggressive cooling according to the profile in BIOS or via iCUE. At low load, Zero RPM Mode completely turns off the fans, so your system runs practically silently while you are in idle, browsing, or watching video. The FlowDrive 2S pump and copper cold plate ensure stable heat exchange, and the pre-applied XTM60 thermal paste saves you from fiddling with tubes and guarantees even coverage right from the first installation. The 3.5" IPS LCD with 60 Hz refresh rate, connected directly to the GPU via DisplayPort, allows you to display system parameters, animations, or static images, while iCUE handles personalization and real-time monitoring.

• Liquid AIO cooling with a 360 mm aluminum radiator, suitable for cases with support for 3 x 120 mm fans in a line (radiator dimensions 395 x 120 x 55 mm).
• Broad compatibility with modern platforms thanks to support for LGA 1851, LGA 1700, AM5 and AM4 CPU sockets.
• Three pre-mounted 120 mm RS II Unified Frame fans with 4-pin PWM control and daisy-chain connection capability for fewer cables.
• Speed range of 420 – 2100 RPM ±10%, airflow of 10.8 – 73 CFM and static pressure up to 4.2 mm H₂O for effective cooling of a dense radiator.
• Maximum noise level up to 36 dBA, with Zero RPM Mode turning off the fans at low load for completely silent operation.
• 3.5" IPS LCD display with a resolution of 480 x 640 and 60 Hz, connected to the GPU via DisplayPort and controlled via CORSAIR iCUE (widgets, personalization, monitoring).
• FlowDrive 2S pump with a copper cold plate and pre-applied XTM60 thermal paste, plus 450 mm tubes for easier routing even in larger cases.
• Flexible connection: pump via 4-pin PWM to AIO_PUMP / CPU_OPT / SYS_FAN, fans via a single 4-pin PWM cable (600 mm) to CPU_FAN and optional control via iCUE controller.

Who it is suitable for

This cooler is a strong choice if you are after stable temperatures for a powerful CPU on LGA 1851, LGA 1700, AM5 or AM4 platforms and want a clean, organized build with a serious visual accent through the LCD display. It is suitable for gaming at high settings, streaming, and heavy tasks like rendering and compilations, where prolonged load should not worry you. If you are after the most budget-friendly possible build or use a small case without space for a 360 mm radiator, this solution might be too big and excessive for you.

The combination of a 360 mm radiator, quiet operation with Zero RPM, and a large 3.5" IPS LCD makes this AIO both practical for serious loads and an eye-catching center of your entire system.