Water cooling for CPU ASUS PRIME LC 360 ARGB - 90RC0101-B0EAY0

ASUS PRIME LC 360 ARGB is a water cooling for the processor with a 360 mm radiator, aimed at mid-range to high-end gaming and workstation configurations. The large radiator with three 120 mm fans gives you serious thermal capacity for modern CPUs, especially during long loads with high frequencies. Support for popular sockets such as AM4, AM5, LGA 1200, LGA 1700 and LGA 1851 means you can use it in a new build and for future upgrades. Addressable RGB lighting allows synchronization with other ARGB components and a cleaner finished look inside the case.

What you get is a 360 mm water radiator with three 120 x 120 x 25 mm fans, which work in a range from 600 to 2200 RPM – this gives you a balance between quiet idle and serious air flow under load. The declared air flow of 75.7 CFM and maximum pressure of 3.2 mmH2O are important if you have dense radiator fins or limited airflow in the case. The pump with a speed of 800 – 3600 ± 10% RPM and DC 12V power supply ensures stable fluid circulation even during prolonged stress tests or rendering. The 4 PIN connector for the fans allows PWM control via the motherboard, and the 5V ARGB connector gives you full control over the lighting via compatible software. Thus you can set up profiles – quiet mode for work and powerful for gaming or heavy tasks.

• A large radiator with a size of 360 mm ensures sufficient area for cooling modern multi-core CPUs under overclocking or prolonged gaming.
• Three included fans with a size of 120 x 120 x 25 mm cover the entire radiator and improve efficiency compared to smaller AIO solutions.
• A wide speed range from 600 - 2200 RPM allows quiet operation at low load and aggressive cooling at maximum load.
• Air flow 75.7 CFM and maximum pressure 3.2 mmH2O are suitable for radiator fins with higher density and cases with more limited air intake.
• Compatibility with sockets AM4, AM5, LGA 1151, LGA 1200, LGA 1700, LGA 1851 makes the cooler a universal choice for current and future platforms.
• A pump with a speed of 800 - 3600 ± 10% RPM, powered by DC 12V, ensures stable fluid circulation during long loads.
• Addressable RGB and 5V ARGB connector gives you individual control of the lighting and easy synchronization with other ARGB components.

This water cooling is suitable if you are building a serious gaming or productive build and want lower temperatures than a typical air cooler, especially on AM5 or LGA 1700 platforms. A good choice is also if you stick to a clean interior with ARGB accents and want to control the fan profiles via the motherboard. It is not the most logical option if you plan a completely budget build with a low TDP processor and no need for a 360 mm radiator.

The most sensible here is the combination of a 360 mm radiator, three PWM fans with good air flow and wide socket compatibility, plus Addressable RGB for a finished look of the system. If you are looking for serious water cooling that will remain relevant even with the next CPU upgrade, this model covers the main requirements without unnecessary compromises.