Water cooling for processor Corsair iCUE LINK TITAN 360 RX RGB AIO Liquid CPU Cooler - CW-9061018-WW

This is the Corsair iCUE LINK TITAN 360 RX RGB water cooling for processors – an AIO solution with a large 360 mm radiator, aimed at serious gaming and high-end configurations. It relies on three 120 x 120 x 25 mm fans with a wide RPM range from 300 - 2100 RPM, allowing for both quiet operation and aggressive cooling when needed. The copper water block improves heat exchange, and the addressable RGB provides a look that you can sync with the rest of the lighting in the case. Support for AM4, AM5, LGA 1700, and LGA 1851 sockets makes it relevant for new AMD and Intel platforms.

What you get

With a 360 mm radiator and three included fans, you have a large area for heat dissipation, which is important for more serious CPUs and long gaming or rendering sessions. The airflow range of 10.4 - 73.5 CFM and static pressure up to 4.33 mm H₂O means the radiator can be effectively blown even in denser, mesh, or dust filter configurations. The noise level up to 36 dB is a reasonable compromise between cooling and acoustics, especially if you use lower RPMs at idle and light load. The copper water block helps heat transfer quickly from the CPU cap to the liquid, and 450 mm tubes provide flexibility for mounting at the front or top in larger cases. The pump power supply with DC 12V is standard and without surprises in compatibility.

• Large 360 mm radiator, suitable for higher thermal loads and overkill cooling in gaming and workstation configurations.
• Three included fans sized 120 x 120 x 25 mm provide a good balance between airflow, pressure, and compatibility with most cases.
• Wide range of 300 - 2100 RPM ±10% allows you to adjust cooling from nearly silent at idle to aggressive under full load.
• Airflow between 10.4 and 73.5 CFM and static pressure up to 4.33 mm H₂O help effectively blow through dense radiator fins and filters.
• Noise level around 36 dB at maximum load, which is perfectly acceptable for a 360 mm AIO with three fans.
• Copper water block for better heat exchange between the CPU and liquid, suitable for long loads.
• Addressable RGB lighting for customizing the look and syncing with other RGB components in the system.
• Compatibility with AM4, AM5, LGA 1700, and LGA 1851 sockets, so you can use it for future platform upgrades.
• 450 mm tube length for more freedom in positioning the radiator in larger cases (front/top mounting).
• Standard 4 PIN connector for fans for easy control through the motherboard and cooling profiles.

Who it is suitable for

This AIO is suitable for gamers and enthusiasts with more powerful CPU configurations who want 360 mm cooling and control over noise/temperatures. It also fits well for creators with long renders and encoding, where stable temperatures are important. If you have a more compact case or mid-range processor, it may be a slight overkill and something smaller in size might be more reasonable.

The combination of a 360 mm radiator, copper block, wide RPM range, and addressable RGB makes this Corsair iCUE LINK TITAN 360 RX RGB a strong choice if you are looking for serious water cooling with good flexibility for mounting and platform.