ADATA XPG CORE REACTOR II VE 750G (750W) 80 Plus Gold PSU ATX 3.1 PCIe 5.1

ADATA XPG CORE REACTOR II VE 750G is a 750W modular ATX power supply from mid-range to higher class, aimed at modern gaming and work configurations. The 80+ Gold certification and up to 90% efficiency give you lower consumption and less heating compared to cheaper “bronze” solutions. Support for ATX 3.0/3.1 and PCIe Gen 5.0/5.1 means it is ready for the new generations of GPUs with 12VHPWR connectors. The compact length of 140 mm makes installation easier even in shorter cases, without sacrificing power or functionality.

What you get

With a real 750W output power and the ability for short-term loads up to 1762W (up to 235% for 100μs), the power supply is designed to withstand sudden spikes in consumption from modern GPUs and CPUs without “dropping” voltage. The 12VHPWR (12+4) connector (600W) prepares you for next-generation graphics cards, without the need for adapters. The six PCI-E 6+2 pin connectors also allow for classic multi-GPU/multi-expansion configurations if needed. The modular design helps you use only the necessary cables, improving airflow and making cable management easier, while the 120mm F.D.B. fan ensures quieter and longer-lasting operation.

• Power 750W – sufficient for strong gaming and work systems with a modern GPU and many peripherals, without lacking “headroom” for upgrades.
• 80+ Gold certification and up to 90% efficiency – lower energy losses and less heat in the case compared to lower-class power supplies.
• ATX 3.0/3.1 and PCIe Gen 5.0/5.1 support – fully prepared for new standards and sudden consumption peaks of modern components.
• 12VHPWR (12+4) 600W connector – directly connect PCIe 5.x graphics cards without adapters, with reserve for high-performance GPUs.
• 6× PCI-E 6+2 pin, 8× SATA and 4× Molex – enough connectors for multiple GPUs, many SSD/HDDs, fans, and additional accessories.
• Modular design – use only the necessary cables, improve airflow, and maintain a cleaner internal appearance of the system.
• 120mm F.D.B. fan – smoother operation, lower noise, and longer life compared to standard sleeve bearing fans.
• Full package of protections (OVP / OPP / SCP / OCP / UVP / OTP / NLO / SIP) – protect your components from overvoltage, overload, short circuit, overheating, and other unwanted scenarios.
• Compact dimensions 140 x 150 x 86 mm and active PFC – easy installation in most ATX cases and more stable operation at input voltage 100–240 VAC.
• 5 years warranty (60 months) – additional peace of mind for long-term use.

Who it is suitable for

It is suitable for gaming and creative configurations with mid to high-end GPUs, where you want a stable ATX 3.0/3.1 power supply and readiness for PCIe 5.1 cards. It is also a good choice if you plan to upgrade to newer graphics cards in the coming years and do not want to change the PSU. If you are aiming for extreme dual high-end GPU builds, you might want to look for higher power, but for a serious card, 750W is a very reasonable balance.

The most sensible aspect here is the combination of 750W, Gold efficiency, modular design, and true ATX 3.1 / PCIe 5.x support in a compact body – a practical power supply that is ready for the next few generations of hardware.