Power Supply Chieftec Polaris Pro 1300W ATX 3.0 80 Plus Gold PSU - PPX-1300FC-A3

Chieftec Polaris Pro 1300W is an ATX 3.0 power supply for serious systems – high-end gaming, workstations, multi-drive configurations, or future upgrades to top GPUs. With 1300W power and 80+ Gold certification, you get stable and efficient DC power even under serious load. It features a 135mm FDB fan that takes care of cooling with lower noise and longer life. The power supply is fully modular, in standard ATX format and with ATX 3.0 / PCIe Gen 5.0 support, which covers you for both current and future graphics cards.

What you get: with real 1300W at 100–240 VAC input, you can safely power a high-end CPU + powerful GPU, along with many SSDs/HDDs, fans, and peripherals. A 1 x 12+4 Pin PCI-E (12VHPWR) connector provides direct compatibility with PCIe Gen 5.0 graphics cards, while 6 x 6+2 Pin PCI-E gives you freedom for previous generations of GPUs or multi-GPU scenarios. 12 x SATA connectors are sufficient for a serious array of drives – suitable for a large storage build or home server. Efficiency up to 90% reduces losses and heat, which in turn helps the fan run quieter at idle and moderate load. The modular design with a black chassis and compact length of 160mm makes cable management and installation easier even in more compact cases.

• Power 1300W – enough for high-end gaming or workstation configurations with a powerful CPU and top-class GPU, without worrying about power shortages.
• 80+ Gold certification with up to 90% efficiency – less heat loss, lower consumption from the outlet, and easier cooling under long load.
• ATX 3.0 / PCIe Gen 5.0 and 1 x 12+4 Pin PCI-E (12VHPWR) – direct compatibility with the latest graphics cards and more stable power delivery to the GPU.
• 6 x 6+2 Pin PCI-E and 2 x 4+4 Pin CPU – flexibility for multiple GPU configurations and powerful processors with additional CPU power supplies.
• 12 x SATA + 4 x Molex + Floppy adapter – enough connectors for multiple SSDs/HDDs, fans, pumps, and older peripherals.
• 135mm FDB fan – quieter operation and longer life thanks to fluid dynamic bearing, especially important for 24/7 systems.
• Modular design in a compact ATX chassis (150 x 86 x 160mm) – cleaner interior, better airflow, and easier installation in most mid and full tower cases.
• Active PFC – better power quality and more stable behavior under fluctuations in mains voltage.
• 48 months warranty – four years coverage for a component that your entire system depends on.

Who it is suitable for: if you are planning or already have a high-end build with a powerful next-gen graphics card and want ATX 3.0 / PCIe Gen 5.0 readiness, this power supply is a logical choice. With so many PCI-E and SATA connectors, it is also very convenient for content creators, rendering machines, and large storage configurations. For a more budget or small office build, it is rather an excessive overkill, but for serious and long-term configurations, it provides a good buffer.

The combination of 1300W, 80+ Gold efficiency, ATX 3.0 / 12VHPWR, and modular design makes the Chieftec Polaris Pro 1300W a stable foundation for a powerful and future-oriented build. This is the type of PSU that you install once and forget about the power supply during the next few upgrades.