Power Supply Corsair RMe RM1000e White 1000W 80+ Gold ATX 3.1, Thermal Protect - CP-9020339-EU

Corsair RMe RM1000e White is a 1000W ATX 3.1 power supply from the higher class, aimed at serious gaming and workstation configurations with powerful GPUs and lots of peripherals. With an 80+ Gold certificate and up to 90 % efficiency, it is a good foundation for a stable and relatively quiet build. The white color and compact length of 140 mm make it a convenient choice for smaller cases and a clean internal look. Add to this fully modular cables, ATX 3.1 and PCIe 5.1 compatibility, and you really get a power supply ready for current and next-generation graphics cards.

What you get: real 1000 W output power with active PFC and ATX 3.1 design, which means better performance during sharp consumption peaks from modern GPUs and CPUs. The 12V-2x6 PCIe 5.1 600W ThermalProtect cable is made specifically for new graphics cards and has built-in Over Temperature Protection (OTP) to reduce the risk of poor contact or connector overload. Zero RPM Mode allows the 120 mm fan to stop completely under low load, so the system is almost silent in idle. The 105°C-rated capacitors and the full set of protections (OVP/UVP/OCP/OPP/SCP/OTP) add long-term reliability, which Corsair also covers with an 84-month warranty.

• 1000 W Power – sufficient for a high-end GPU plus a strong CPU, several SSD/HDD drives, and many fans, without risking instability at peak load.
• 80+ Gold certificate with up to 90 % efficiency – lower energy losses, less heat dissipation, and quieter operation at the same load compared to a lower-class PSU.
• ATX 3.1 and PCIe 5.1 compatibility – readiness for current and future graphics cards, including direct power delivery via the 12V-2x6 connector up to 600 W.
• Fully modular Type 4 cables – you connect only the cables you need, which makes cable management easier and improves airflow in the case.
• Zero RPM Mode and 120 mm fan – the fan stops under low load for silent operation in idle and light tasks, while providing adequate cooling under load.
• 105°C-rated capacitors and a full set of protections (OVP/UVP/OCP/OPP/SCP/OTP) – increased durability at higher temperatures and protection of all components during power supply anomalies.
• Compact dimensions 140 × 150 × 86 mm and white color – a short chassis for better compatibility with smaller cases and a clean white build without RGB lighting, if you are looking for a simpler look.
• Rich set of connectors – 1 x 24-pin ATX, 2 x 8-pin (4+4) EPS/ATX12V, up to several PCIe variants, 6 x SATA, and 2 x Molex cover modern systems with many devices.

It is suitable if you are planning a powerful gaming or content creation machine with a current or next-gen GPU and want ATX 3.1/PCIe 5.1 support right now. If you are after maximum RGB decoration in the power supply – there is no lighting here, and it is more for a clean, functional, and aesthetic white build.

The most sensible thing about this model is the combination of 1000 W, 80+ Gold efficiency, ATX 3.1 + PCIe 5.1, and the ThermalProtect 12V-2x6 cable, plus the long 84-month warranty – a PSU that you can really use comfortably across several generations of upgrades.