Power Supply COUGAR ATLAS 650, 650W 80 Plus Bronze ATX 3.1 PSU

COUGAR ATLAS 650 is a 650W ATX power supply with 80+ Bronze certification and support for ATX 3.0/3.1 and PCIe Gen 5.0/5.1, aimed at mid-range gaming and workstation configurations. You get a power supply unit that comfortably covers modern CPU + GPU combinations, including cards with a 12VHPWR connector. With efficiency up to 87% and active PFC, it is a reasonable choice if you're looking for a balance between price, stability, and consumption. The compact length of 140 mm helps it fit easily into tighter mid-tower cases.

What you get: In terms of power, 650W is more than enough for a standard gaming build with a modern graphics card and a few SSD/HDD drives, without worrying about PSU bottlenecks. The presence of 1 x 12+4 Pin PCI-E (PCI-E Gen5 12VHPWR) opens a direct path to the new generation of GPUs without the need for adapters. With 6 x SATA connectors, you can easily connect several SSDs, one or two large HDDs, and another device like an RGB controller or water cooling. The combination of a 120mm fan and active PFC helps for more stable operation under various loads and better efficiency at 100 – 240V input. The non-modular design means more fixed cables, but also fewer points for problems and a lower price.

• Power 650W – a good base for mid-range gaming configurations with modern CPU and powerful GPU, without being at the limits of the power supply's capabilities.
• 80+ Bronze certification with efficiency up to 87% – less heat loss and better energy efficiency compared to basic non-certified PSU solutions.
• ATX 3.0/3.1 and PCIe Gen 5.0/5.1 support – compatibility with the latest power supply standards, including typical power spikes of modern graphics cards.
• 1 x 12+4 Pin PCI-E (PCI-E Gen5 12VHPWR) – direct power for new GPUs without adapters, plus 2 x 6+2 Pin PCI-E for older or second graphics cards.
• Rich set of connectors: 1 x 24 pin ATX, 1 x 4+4 Pin CPU, 6 x SATA and 2 x Molex, covering a typical gaming or workstation system with several storage devices and peripherals.
• 120mm fan – standard size for better airflow and lower speeds under normal load.
• Compact dimensions 140 x 150 x 86 mm and length 140 mm – convenient installation in most ATX cases, including more compact chassis.
• Active PFC – more stable power supply and better utilization of the mains voltage in the range of 100 – 240 VAC.

It is suitable if you are building a budget or mid-range gaming build, a workstation for everyday tasks or streaming, and want a PSU that is ready for newer GPUs with 12VHPWR. It is not the most logical choice for extreme high-end systems with many components and power-hungry flagship graphics cards, where higher power often makes sense.

The combination of 650W, 80+ Bronze, support for ATX 3.0/3.1, and built-in 12+4 pin PCI-E Gen5 connector makes it a practical choice if you want to be prepared for the next generations of GPUs without overspending your power supply budget.