Power supply DeepCool PN1000-M 1000W 80 Plus Gold PSU ATX 3.1 Full Modular

DeepCool PN1000-M is a 1000W ATX power supply from a higher class, aimed at stable gaming and workstation configurations with powerful GPUs. The 80+ Gold certification and declared 90% efficiency give you lower losses and less excess heat. ATX 3.0/3.1 support with PCIe Gen 5.0/5.1 means you are ready for modern graphics cards with the new connector. The modular design keeps the cables organized and saves headaches during cable management.

What you get is a power supply with sufficient resources for high-end GPUs and plenty of storage without worrying if it will “make it”. 1000W provides a comfortable buffer for overclocking, more fans, and future upgrades. With one PCI-E 5.1 connector and three more PCI-Express 6+2 pin, you can power a modern graphics card and leave room for more serious models or additional cards. Eight SATA connectors are more than enough for several SSDs and HDDs, while the modular design allows you to connect only what you actually use. The 135mm FDB fan helps for quieter and smoother operation under load, without unnecessary noise.

• Power 1000W – provides peace of mind for configurations with powerful CPUs and high-end GPUs, plus additional devices and upgrades.
• 80+ Gold certification and 90% efficiency – less heat loss and more stable operation under high load.
• ATX 3.0/3.1 with PCIe Gen 5.0/5.1 – readiness for modern graphics cards through the included PCI-E 5.1 connector.
• Full modular design – connect only the necessary cables for a cleaner interior and better airflow.
• Connectors: 20+4 Pin ATX, 2x 4+4 Pin ATX/EPS, 3x PCI-E 6+2, 1x PCI-E 5.1, 8x SATA, 2x Molex – flexibility for modern systems and older devices.
• 135mm FDB fan – smoother rotation and lower noise compared to standard fans, especially under long load.
• Active PFC and wide input 100–240 VAC – stable operation under different mains voltage, suitable for our conditions.

Who it is suitable for: if you are building a serious gaming or workstation build with a powerful graphics card and want a buffer for future upgrades, this power supply is a logical choice. It is also suitable for systems with many drives or additional cards. For more budget-friendly configurations with low consumption, 1000W may be more than you need and you won’t utilize its potential.

The combination of 1000W power, 80+ Gold efficiency, ATX 3.1 support, and full modular design makes DeepCool PN1000-M a stable foundation for a serious, long-term build. If you are looking for a power supply that you won’t need to replace with the next GPU upgrade, this is exactly the type of component you need.